Sculptor's render of the painted design (kit ships unpainted): the yellow rag-disguise creature peeking out from behind a dead tree above a small pool, with a ribbed paper lantern and ferns on the base

Video Game Chibi Rag-Disguise Creature Resin Garage Kit – Dead Tree, Paper Lantern & Little Pond Base (Unpainted, 4 Pieces)

Full kit, 4 pieces
$39.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): the yellow rag-disguise creature peeking out from behind a dead tree above a small pool, with a ribbed paper lantern and ferns on the base
  • Sculptor's render of the painted design (kit ships unpainted): the yellow rag-disguise creature peeking out from behind a dead tree above a small pool, with a ribbed paper lantern and ferns on the base
  • Sculptor's render (kit ships unpainted): closer view of the scribbled face, spiral eyes and claw on the tree trunk, with the lantern in front
  • Sculptor's render (kit ships unpainted): unpainted gray front view from the left, showing the fern bank, the pool and the raised lines of the drawn face
  • Sculptor's render (kit ships unpainted): gray view from the left side, the trunk in profile and the branch reaching over the creature
  • Sculptor's render (kit ships unpainted): gray view from the right, the lantern in front and the lightning-bolt tail on its stick in profile
  • Sculptor's render (kit ships unpainted): gray rear view of the tree trunk with the creature's head and tail peeking around it
  • Sculptor's render of the painted design (kit ships unpainted): the yellow rag-disguise creature peeking out from behind a dead tree above a small pool, with a ribbed paper lantern and ferns on the base
  • Sculptor's render (kit ships unpainted): closer view of the scribbled face, spiral eyes and claw on the tree trunk, with the lantern in front
  • Sculptor's render (kit ships unpainted): unpainted gray front view from the left, showing the fern bank, the pool and the raised lines of the drawn face
  • Sculptor's render (kit ships unpainted): gray view from the left side, the trunk in profile and the branch reaching over the creature
  • Sculptor's render (kit ships unpainted): gray view from the right, the lantern in front and the lightning-bolt tail on its stick in profile
  • Sculptor's render (kit ships unpainted): gray rear view of the tree trunk with the creature's head and tail peeking around it
Video Game Chibi Rag-Disguise Creature Resin Garage Kit – Dead Tree, Paper Lantern & Little Pond Base (Unpainted, 4 Pieces)

Video Game Chibi Rag-Disguise Creature Resin Garage Kit – Dead Tree, Paper Lantern & Little Pond Base (Unpainted, 4 Pieces)

$39.00
KitFull kit, 4 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 4 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi diorama of the shy little creature from a famous monster-collecting game series that hides under a homemade rag costume. It peeks out from behind a hollow dead tree with one dark claw hooked around the bark and its head tilted toward the viewer. The yellow rag has two pointed ears with dark tips, a scribbled face with spiral eyes, a zigzag mouth and round cheek patches, all sculpted as raised lines, and a lightning-bolt tail propped up on a stick behind it. Below the drawn face, its real eyes show as two small dark dots, and the hem of the rag is ragged. The tree's one long branch curls out over its head, and a spiral knot and a small four-petal flower sit on the trunk. The base is a low oval of grass, star-shaped plants and big fern leaves around a small pool with a can floating in it, with a ribbed paper lantern standing on a rock at the water's edge.

What's in the kit

  • 4 resin pieces in total.
  • Figure, 1 piece: the creature in its rag disguise, with the claw, ears and stick tail.
  • Base, 2 pieces: the oval base with the plants, rocks, pool and floating can, and the dead tree with its long branch.
  • Accessories, 1 piece: the ribbed paper lantern.
  • Studio size: 77 mm (3.03 in) tall, 67 × 87 mm (2.64 × 3.43 in) footprint (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The tree has a small tab at the foot of the trunk that locates it on the base. Fit the tree first, then dry-fit the figure against the bark so the claw lands on the trunk.
  • The tree's long branch reaches out over the figure with nothing under it. Remove any supports from it slowly and handle it gently.
  • Thin parts: the ear tips, the stick tail, the fern leaf tips and the lantern's knob.
  • Most of the work is paint: the yellow rag with its drawn face, bark, several greens, water and the lantern.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like