Sculptor's render of the painted design (kit ships unpainted): front view of the brawler standing barefoot on a broken rock slab on top of a carved stone lion head with moss in its curls

Chibi Red-Haired Brawler Resin Garage Kit – Torn Gi, Prayer-Bead Collar & Carved Stone Lion-Head Base (Unpainted, 12 Pieces)

Full kit, 12 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the brawler standing barefoot on a broken rock slab on top of a carved stone lion head with moss in its curls
  • Sculptor's render of the painted design (kit ships unpainted): front view of the brawler standing barefoot on a broken rock slab on top of a carved stone lion head with moss in its curls
  • Sculptor's render (kit ships unpainted): straight-on front view with his arms held out and fists clenched, the lion head turned to one side
  • Sculptor's render (kit ships unpainted): side view from his left, showing the backswept red spikes and the flame-shaped topknot
  • Sculptor's render (kit ships unpainted): side view from his right, with the rope belt knot and the lion's snout and fang in profile
  • Sculptor's render (kit ships unpainted): back view with the red character on the back of the gi, the bead collar and the rough rock back of the base
  • Sculptor's render (kit ships unpainted): low, close view looking up at him, with the violet sheen on the blue gi
  • Sculptor's render (kit ships unpainted): high view looking down on the spiked hair and topknot
  • Sculptor's render (kit ships unpainted): close-up of the scowling face with glowing red eyes, red spiked hair and the large brown prayer beads
  • Sculptor's render of the painted design (kit ships unpainted): front view of the brawler standing barefoot on a broken rock slab on top of a carved stone lion head with moss in its curls
  • Sculptor's render (kit ships unpainted): straight-on front view with his arms held out and fists clenched, the lion head turned to one side
  • Sculptor's render (kit ships unpainted): side view from his left, showing the backswept red spikes and the flame-shaped topknot
  • Sculptor's render (kit ships unpainted): side view from his right, with the rope belt knot and the lion's snout and fang in profile
  • Sculptor's render (kit ships unpainted): back view with the red character on the back of the gi, the bead collar and the rough rock back of the base
  • Sculptor's render (kit ships unpainted): low, close view looking up at him, with the violet sheen on the blue gi
  • Sculptor's render (kit ships unpainted): high view looking down on the spiked hair and topknot
  • Sculptor's render (kit ships unpainted): close-up of the scowling face with glowing red eyes, red spiked hair and the large brown prayer beads
Chibi Red-Haired Brawler Resin Garage Kit – Torn Gi, Prayer-Bead Collar & Carved Stone Lion-Head Base (Unpainted, 12 Pieces)

Chibi Red-Haired Brawler Resin Garage Kit – Torn Gi, Prayer-Bead Collar & Carved Stone Lion-Head Base (Unpainted, 12 Pieces)

$97.00
KitFull kit, 12 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 12 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the dark, red-haired master from a classic arcade fighting game. He stands square to the front with his feet planted wide on a jagged slab of rock, his arms held out from his sides and both fists clenched at hip height, his head pushed forward so he glares out from under a heavy, knotted brow with glowing red eyes, a broad nose and a hard downturned frown. His hair is a mass of crimson spikes sweeping up and back, with a flame-shaped topknot bound in rope rising from the crown. A ring of oversized round prayer beads sits high around his neck like a collar. He wears a deep blue sleeveless gi with the armholes torn into ragged flaps, a crossover collar and a red character on the back, a thick twisted rope belt knotted at the front, loose trousers cut off at mid-shin into torn cuffs, and wide leather bracers with a strap looped around each hand; his feet are bare. His arms are chibi-short but heavily muscled. The base is a carved stone guardian-lion head with spiral curls for brows and mane, round eyes, flared nostrils and upturned fangs, patches of green moss in the hollows, and a broken slab of lighter rock on top where he stands; the back of the base is rough broken rock.

What's in the kit

  • 12 resin pieces in total.
  • Figure, 9 pieces: the head, the spiked hair, the flame-shaped topknot, the gi top with the rope belt, the trousers as a single piece, two arms with bracers and fists, and two bare feet.
  • Accessories, 2 pieces: the prayer-bead collar in two halves.
  • Base, 1 piece: the carved stone lion head with the broken rock slab on top.
  • Tallest single piece: the stone base, 83.2 mm (3.28 in) tall in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Stone base: 102.9 × 136.8 mm (4.05 × 5.39 in) across in the sculptor's file.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The stone base is the largest part in the kit. I print it hollow, so fill the small drain holes before priming.
  • The spiked hair is a big, heavy block with sharp tips sitting on top of the figure. Pin it to the head and the head to the torso.
  • The torn armhole flaps, ragged trouser cuffs, belt-knot ends and the strap loops over the fists are thin.
  • The bead collar comes in two halves that meet around the neck. Dry-fit them before gluing, and pin both bare feet into the rock.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like