Sculptor's render of the painted design (kit ships unpainted): front view of the figure with the twin blades crouched on the rock base, with the broken column behind, arrows in the stone and the half-buried chest at the front

Chibi Tattooed Warrior Resin Garage Kit – Twin Chain Blades and Lion Gauntlets Both Included, Broken Column, Arrows & Rock Base (Unpainted, 19 Pieces)

Full kit with blades and gauntlets, 19 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the figure with the twin blades crouched on the rock base, with the broken column behind, arrows in the stone and the half-buried chest at the front
  • Sculptor's render of the painted design (kit ships unpainted): front view of the figure with the twin blades crouched on the rock base, with the broken column behind, arrows in the stone and the half-buried chest at the front
  • Sculptor's render (kit ships unpainted): the same front view with the lion-head gauntlets in place of the blades
  • Sculptor's render (kit ships unpainted): three-quarter view of the figure with the twin blades, the left blade held out to the side over the base
  • Sculptor's render (kit ships unpainted): three-quarter view of the figure with the lion gauntlets, a roaring lion head held out to his left
  • Sculptor's render (kit ships unpainted): view from his left showing the red tattoo over his shoulder, the chain-wrapped forearm and arrows by the column
  • Sculptor's render (kit ships unpainted): left side view, leaning forward with a blade, the fluted column and an arrow lodged in its broken top
  • Sculptor's render (kit ships unpainted): right side view with the gold shoulder plates and both glowing blades held forward
  • Sculptor's render (kit ships unpainted): high view of the figure with the lion gauntlets looking down on his head and the glowing chest
  • Sculptor's render (kit ships unpainted): low, close front view of the two snarling lion-head gauntlets
  • Sculptor's render (kit ships unpainted): close-up of the scowling face with gold eyes, the stitched scar and the red tattoo
  • Sculptor's render of the painted design (kit ships unpainted): front view of the figure with the twin blades crouched on the rock base, with the broken column behind, arrows in the stone and the half-buried chest at the front
  • Sculptor's render (kit ships unpainted): the same front view with the lion-head gauntlets in place of the blades
  • Sculptor's render (kit ships unpainted): three-quarter view of the figure with the twin blades, the left blade held out to the side over the base
  • Sculptor's render (kit ships unpainted): three-quarter view of the figure with the lion gauntlets, a roaring lion head held out to his left
  • Sculptor's render (kit ships unpainted): view from his left showing the red tattoo over his shoulder, the chain-wrapped forearm and arrows by the column
  • Sculptor's render (kit ships unpainted): left side view, leaning forward with a blade, the fluted column and an arrow lodged in its broken top
  • Sculptor's render (kit ships unpainted): right side view with the gold shoulder plates and both glowing blades held forward
  • Sculptor's render (kit ships unpainted): high view of the figure with the lion gauntlets looking down on his head and the glowing chest
  • Sculptor's render (kit ships unpainted): low, close front view of the two snarling lion-head gauntlets
  • Sculptor's render (kit ships unpainted): close-up of the scowling face with gold eyes, the stitched scar and the red tattoo
Chibi Tattooed Warrior Resin Garage Kit – Twin Chain Blades and Lion Gauntlets Both Included, Broken Column, Arrows & Rock Base (Unpainted, 19 Pieces)

Chibi Tattooed Warrior Resin Garage Kit – Twin Chain Blades and Lion Gauntlets Both Included, Broken Column, Arrows & Rock Base (Unpainted, 19 Pieces)

$65.00
KitFull kit with blades and gauntlets, 19 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 19 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the pale, bald warrior with the red tattoo from a famous video game series set in Greek myth. He crouches low on two levels of broken rock and leans toward you, glaring from under a heavy brow, with a stitched scar through one eyebrow and a black goatee. The red tattoo runs from his crown over one eye and down his side, shoulder and back. He wears a gold shoulder cap and a gold ram-horn plate on his right arm, a gold belt with a Greek key band, a maroon sash, a ring of leather hip straps, gold shin guards and sandals. Behind him a broken fluted column leans against the rock, five arrows stand in the stone, and at the front corner a chest with a glowing red symbol on its lid sits half buried in the rock. Both sets of arms are in the box, so you can swap them as you like: one pair holds curved, glowing red-inlaid blades with beast-head hilts and short chains, with chains and red wraps on his forearms; the other pair ends in two roaring lion-head gauntlets.

What's in the kit

  • 19 resin pieces in total.
  • Figure, 11 pieces: head, torso, belt with sash and hip straps, two legs, two gold armor plates, two forearms holding the curved, red-inlaid blades, and two lion-head gauntlet arms that swap in for the blade arms.
  • Arrows, 5 pieces: five thin arrows that stand in the stone.
  • Column, 1 piece: the broken fluted column.
  • Base, 2 pieces: the rock base with the half-buried chest.
  • Tallest single piece: the broken column, 103.0 mm (4.06 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Rock base: 128.5 × 127.5 mm (5.06 × 5.02 in) across, from the sculptor's single-piece file of the same base.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The blades reach far out from his arms and the gauntlets are heavy, and both hang off the ends of the arms. Pin both arms. I print the gauntlets hollow, so fill the small drain holes before priming. To keep both pairs swappable, pin the arms and don't glue them.
  • The whole figure stands on two sandaled feet at different heights on the rock. Pin both feet into the base.
  • The five arrows are very thin and small. Fit them after the figure is on the base, since two stand close behind his legs.
  • The rock base comes in two pieces with a seam through the stone; seat the column against the rock at its lean before gluing.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like