Sculptor's render of the painted design (kit ships unpainted): full three-quarter front view on the round bolted disc base, one hand on the sheathed sword at her hip and the teal jacket draped over her shoulders

Video Game Fox-Eared Swordswoman Resin Garage Kit – Teal Jacket over the Shoulders, Sheathed Sword & Bolted Disc Base (Unpainted, 15 Pieces)

Full kit, 15 pieces
$75.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full three-quarter front view on the round bolted disc base, one hand on the sheathed sword at her hip and the teal jacket draped over her shoulders
  • Sculptor's render of the painted design (kit ships unpainted): full three-quarter front view on the round bolted disc base, one hand on the sheathed sword at her hip and the teal jacket draped over her shoulders
  • Sculptor's render (kit ships unpainted): full front view with her arm held out and the long blue-black hair streaming behind
  • Sculptor's render (kit ships unpainted): full side view from her right with the sheathed sword angled back across the base
  • Sculptor's render (kit ships unpainted): full side view from her left, the jacket sleeves flaring and the sword hilt at her hip
  • Sculptor's render (kit ships unpainted): rear view of the full figure with the jacket, the long hair and the scabbard behind her
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the braid, fox ears and long hair blowing out to the side
  • Sculptor's render of the painted design (kit ships unpainted): full three-quarter front view on the round bolted disc base, one hand on the sheathed sword at her hip and the teal jacket draped over her shoulders
  • Sculptor's render (kit ships unpainted): full front view with her arm held out and the long blue-black hair streaming behind
  • Sculptor's render (kit ships unpainted): full side view from her right with the sheathed sword angled back across the base
  • Sculptor's render (kit ships unpainted): full side view from her left, the jacket sleeves flaring and the sword hilt at her hip
  • Sculptor's render (kit ships unpainted): rear view of the full figure with the jacket, the long hair and the scabbard behind her
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the braid, fox ears and long hair blowing out to the side
Video Game Fox-Eared Swordswoman Resin Garage Kit – Teal Jacket over the Shoulders, Sheathed Sword & Bolted Disc Base (Unpainted, 15 Pieces)

Video Game Fox-Eared Swordswoman Resin Garage Kit – Teal Jacket over the Shoulders, Sheathed Sword & Bolted Disc Base (Unpainted, 15 Pieces)

$75.00
KitFull kit, 15 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 15 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the fox-eared swordswoman who leads an elite special-operations unit in a stylish urban action game. She stands with her weight on one leg, one hand resting on the hilt of a sheathed sword at her hip and the other arm held slightly out, giving the viewer a sidelong look. Her very long blue-black hair with a blunt fringe and a thin braid streams out behind her, shading to red at the tips, and her dark fox ears have pale inner tufts. She wears a pale grey shirt with a badge on the chest and a loose dark teal tie, a black leather underbust corset with straps and buckles, a short dark pleated wrap skirt, glossy black tights and black stiletto ankle boots, with a deep teal jacket draped over her shoulders and its empty sleeves flaring. The base is a round gunmetal disc with a bolted hexagonal rim and an embossed inner disc.

What's in the kit

  • 15 resin pieces in total.
  • Figure, 8 pieces: head with face, torso, two legs, left hand, right hand with the sword, main hair and a small hair piece.
  • Cloth, 4 pieces: the jacket, the skirt and the necktie in two pieces.
  • Base, 1 piece: the round bolted disc.
  • Accessories, 2 pieces: the two scabbard tip pieces.
  • Tallest single piece: the right leg, 161.0 mm (6.34 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Round base: 106.3 × 106.3 mm (4.19 × 4.19 in) across in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The main hair is a large piece that hangs off the back of the head with no other contact. Pin it.
  • Both legs meet the torso at the hip and the whole figure stands on two stiletto heels. Get both feet flat on the base before the glue sets; the skirt covers the hip join.
  • The jacket is a wide, thin shell with empty flaring sleeves, and the necktie and scabbard tips are very thin.
  • The sword and scabbard come with the right hand and have to line up with where the scabbard passes behind the skirt.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Hybris 3D Studios. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Hybris 3D Studios' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like