Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 statue with the studio's sizes for each version (miniature 91 mm tall), and the parts of each version laid out, the miniature's in the bottom middle

Video Game Leather Jacket Swordsman Resin Garage Kit – Fur Collar, Gun-Hilt Sword & Tentacle Monster Base (Unpainted, Miniature, 5 Pieces)

Miniature, 5 pieces
$39.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 statue with the studio's sizes for each version (miniature 91 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 statue with the studio's sizes for each version (miniature 91 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Sculptor's render (kit ships unpainted): the painted design, front three-quarter view of the swordsman in a black leather jacket with a white fur collar standing on the green tentacled monster; the miniature is the same sculpt at 91 mm tall, in 5 pieces
  • Sculptor's render (kit ships unpainted): painted front view with the outstretched gloved hand and the monster's wide mouth of teeth below his boots; the miniature is the same sculpt at 91 mm tall, in 5 pieces
  • Sculptor's render (kit ships unpainted): painted side view from behind with the arms spread and the tan rock spike beside his boot; the miniature is the same sculpt at 91 mm tall, in 5 pieces
  • Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 statue with the studio's sizes for each version (miniature 91 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Sculptor's render (kit ships unpainted): the painted design, front three-quarter view of the swordsman in a black leather jacket with a white fur collar standing on the green tentacled monster; the miniature is the same sculpt at 91 mm tall, in 5 pieces
  • Sculptor's render (kit ships unpainted): painted front view with the outstretched gloved hand and the monster's wide mouth of teeth below his boots; the miniature is the same sculpt at 91 mm tall, in 5 pieces
  • Sculptor's render (kit ships unpainted): painted side view from behind with the arms spread and the tan rock spike beside his boot; the miniature is the same sculpt at 91 mm tall, in 5 pieces
Video Game Leather Jacket Swordsman Resin Garage Kit – Fur Collar, Gun-Hilt Sword & Tentacle Monster Base (Unpainted, Miniature, 5 Pieces)

Video Game Leather Jacket Swordsman Resin Garage Kit – Fur Collar, Gun-Hilt Sword & Tentacle Monster Base (Unpainted, Miniature, 5 Pieces)

$39.00
KitMiniature, 5 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 5 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

The miniature version of a fan-art statue of the brooding young mercenary hero from a classic role-playing game, mid-fight on top of a monster: the same sculpt as the full statue, made smaller and in 5 pieces. He plants one boot on the creature's back and braces the other against a ridge, his body twisted toward the viewer, one arm thrown straight out with the gloved fingers spread and the other held low and back with a long sword whose hilt is built like a gun, with a cylinder and trigger in the grip and a braided lanyard hanging from the pommel. His brown hair falls in a long fringe between his blue eyes. He wears a short black leather jacket with a thick white feathered collar, a full-length zipper and strapped cuffs over a white V-neck shirt, a silver chain with a lion-head pendant, two red-brown belts with a lion-head buckle, white fur tufts at both hips, black leather trousers with three buckled straps around one thigh, black gloves, studded black boots and a black half-skirt at the back that flares out in the wind. The base is a round, warty green monster with a huge mouth of cream teeth and a ring of thick curling tentacles, some raised like horns, with two tan rock spikes pushing up through them. The studio's scale sheet gives the miniature as 91 mm tall. The full 1:10 scale statue and the bust are sold as separate listings.

What's in the kit

  • 5 resin pieces in total.
  • Figure, 4 pieces: head, torso with the outstretched arm, the sword arm with the sword, and the legs with the half-skirt and hip furs.
  • Base, 1 piece: the monster and the rocks as a single piece.
  • Miniature: 91 mm (3.58 in) tall, 55 mm (2.17 in) wide and 85 mm (3.35 in) long (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The miniature is five parts, and the monster and rocks are a single-piece base, so there are no base seams to fill.
  • Dry-fit the legs on the monster's back before gluing: one boot sits on the creature and the other braces against the ridge.
  • The sword is part of the sword arm and is long and very thin at this size. Remove its supports slowly and fit that arm last.
  • Thin parts at this size: the collar feathers, the lanyard and the spread fingers.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like