Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the horned-helmet warrior swinging an axe overhead, standing over the fallen white-furred troll on dark slate

Video Game Horned-Helmet Warrior vs Troll Resin Garage Kit – Raised Axe, Round Shield & White-Furred Troll on a Slate Diorama (Unpainted, 1:10 Scale, 18 Pieces)

1:10 scale, 18 pieces
$115.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the horned-helmet warrior swinging an axe overhead, standing over the fallen white-furred troll on dark slate
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the horned-helmet warrior swinging an axe overhead, standing over the fallen white-furred troll on dark slate
  • Sculptor's render (kit ships unpainted): painted warrior roaring with the axe raised and the shield forward, shown against a snowy mountain backdrop
  • Sculptor's render (kit ships unpainted): three-quarter view from the shield side, the troll's wounded arm and furred body in the foreground and the warrior on the slate ledge
  • Sculptor's render (kit ships unpainted): view from behind the troll's head, its fanged mouth open and both arms flung wide, the warrior rising behind it with the axe raised
  • Sculptor's render (kit ships unpainted): rear view of the leather vest with crossed straps, the studded skirt and the back of the shield, the troll's head and clawed hand below
  • Sculptor's render (kit ships unpainted): gray front three-quarter view of the full diorama
  • Sculptor's render (kit ships unpainted): gray side view of the warrior's stance on the slate ledge with the troll's head and fist below
  • Sculptor's render (kit ships unpainted): gray front view with the shield square to the camera and the troll's arms spread to both sides
  • Sculptor's render (kit ships unpainted): wide painted view of the warrior mid-swing against a snowy stone ruin, the troll in the foreground
  • Studio scale and parts sheet (kit ships unpainted): the studio's sheet giving this 1:10 diorama's size, 258 mm tall, 249 mm wide and 195 mm long, with its 18 split parts; the smaller versions shown are the miniature and the bust, sold as separate listings
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the horned-helmet warrior swinging an axe overhead, standing over the fallen white-furred troll on dark slate
  • Sculptor's render (kit ships unpainted): painted warrior roaring with the axe raised and the shield forward, shown against a snowy mountain backdrop
  • Sculptor's render (kit ships unpainted): three-quarter view from the shield side, the troll's wounded arm and furred body in the foreground and the warrior on the slate ledge
  • Sculptor's render (kit ships unpainted): view from behind the troll's head, its fanged mouth open and both arms flung wide, the warrior rising behind it with the axe raised
  • Sculptor's render (kit ships unpainted): rear view of the leather vest with crossed straps, the studded skirt and the back of the shield, the troll's head and clawed hand below
  • Sculptor's render (kit ships unpainted): gray front three-quarter view of the full diorama
  • Sculptor's render (kit ships unpainted): gray side view of the warrior's stance on the slate ledge with the troll's head and fist below
  • Sculptor's render (kit ships unpainted): gray front view with the shield square to the camera and the troll's arms spread to both sides
  • Sculptor's render (kit ships unpainted): wide painted view of the warrior mid-swing against a snowy stone ruin, the troll in the foreground
  • Studio scale and parts sheet (kit ships unpainted): the studio's sheet giving this 1:10 diorama's size, 258 mm tall, 249 mm wide and 195 mm long, with its 18 split parts; the smaller versions shown are the miniature and the bust, sold as separate listings
Video Game Horned-Helmet Warrior vs Troll Resin Garage Kit – Raised Axe, Round Shield & White-Furred Troll on a Slate Diorama (Unpainted, 1:10 Scale, 18 Pieces)

Video Game Horned-Helmet Warrior vs Troll Resin Garage Kit – Raised Axe, Round Shield & White-Furred Troll on a Slate Diorama (Unpainted, 1:10 Scale, 18 Pieces)

$115.00
Kit1:10 scale, 18 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 18 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art diorama from a famous open-world fantasy role-playing game: its hero in a horned steel helmet stands over a huge white-furred troll and swings his axe down at it. He holds a one-handed war axe straight overhead and pushes a round wooden shield forward, mouth open in a roar under the helmet's nose guard and cheek plates. He wears a sleeveless, stitched leather vest with two straps crossing the chest and a round bronze medallion, a single round steel shoulder plate, leather bracers with fur wraps, a belt with a round buckle over studded leather skirt panels and a shaggy fur kilt, and cord-wrapped leather boots with fur cuffs and trailing straps. The troll lies on its back beneath him with its head thrown back, fanged mouth open, and both arms flung wide, one hand a fist and the other open with the claws spread; long shaggy fur covers its back, head and forearms, and gashes are cut into its chest and arm. The base is a stack of flat, cracked slate under the warrior's feet and the troll's body; the troll's arms reach past it on both sides. This listing is the 1:10 scale diorama in 18 pieces. The miniature and the bust are sold as separate listings.

What's in the kit

  • 18 resin pieces in total.
  • Warrior, 9 pieces: helmeted head, torso, front and back hip halves with the studded skirt, upper legs with the fur kilt, two forearms and two lower legs with boots.
  • Troll, 5 pieces: head, torso in two halves and two arms.
  • Weapons, 2 pieces: the axe and the shield.
  • Base, 2 pieces: the slate base in two sections.
  • 1:10 scale: 258 mm (10.16 in) tall, 249 mm (9.80 in) wide and 195 mm (7.68 in) long (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build the slate base first. Its two sections have to line up before anything goes on top, because the warrior and the troll both land on it.
  • The troll's two big arms reach out past the base with nothing under them. Pin both at the shoulder.
  • The troll's torso comes in two halves and the seam runs across smooth skin, not fur. Plan to fill and sand it.
  • Thin parts: the axe haft, the helmet horns, the trailing boot straps and the fur strands along the troll's arms and mane.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like