Sculptor's render of the painted design (kit ships unpainted): front view of the red-cloaked gunman crouched on top of a ruined Gothic window column, his gold claw thrown back and the torn cloak streaming out

Video Game Red-Cloaked Gunman Resin Garage Kit – Gold Claw Gauntlet, Torn Cloak & Ruined Gothic Window Base, Both Gun Hands Included (Unpainted, 28 Pieces)

Full kit with both gun hands, 28 pieces
$137.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the red-cloaked gunman crouched on top of a ruined Gothic window column, his gold claw thrown back and the torn cloak streaming out
  • Sculptor's render of the painted design (kit ships unpainted): front view of the red-cloaked gunman crouched on top of a ruined Gothic window column, his gold claw thrown back and the torn cloak streaming out
  • Sculptor's render (kit ships unpainted): side view of the crouch on the stone cap, with the cloak billowing behind him
  • Sculptor's render (kit ships unpainted): front view from slightly to one side, the window tracery and the rock spires on the carved plinth
  • Sculptor's render (kit ships unpainted): rear view of the long torn red cloak spread over the ruined window base
  • Sculptor's render (kit ships unpainted): closer view of the crouching figure with the long pistol held low and the holster on his thigh
  • Sculptor's render (kit ships unpainted): close view of the buckled red cowl, the leather straps and the long pistol
  • Sculptor's render (kit ships unpainted): close-up of the face, one red eye showing under the red headband and long black hair
  • Sculptor's render (kit ships unpainted): the long engraved pistol on its own
  • Sculptor's render (kit ships unpainted): the second gun hand, a triple-barrel revolver with its hanging chain charm, on its own
  • Sculptor's render (kit ships unpainted): the empty base, a ruined Gothic window column among rock spires on a carved plinth
  • Sculptor's render of the painted design (kit ships unpainted): front view of the red-cloaked gunman crouched on top of a ruined Gothic window column, his gold claw thrown back and the torn cloak streaming out
  • Sculptor's render (kit ships unpainted): side view of the crouch on the stone cap, with the cloak billowing behind him
  • Sculptor's render (kit ships unpainted): front view from slightly to one side, the window tracery and the rock spires on the carved plinth
  • Sculptor's render (kit ships unpainted): rear view of the long torn red cloak spread over the ruined window base
  • Sculptor's render (kit ships unpainted): closer view of the crouching figure with the long pistol held low and the holster on his thigh
  • Sculptor's render (kit ships unpainted): close view of the buckled red cowl, the leather straps and the long pistol
  • Sculptor's render (kit ships unpainted): close-up of the face, one red eye showing under the red headband and long black hair
  • Sculptor's render (kit ships unpainted): the long engraved pistol on its own
  • Sculptor's render (kit ships unpainted): the second gun hand, a triple-barrel revolver with its hanging chain charm, on its own
  • Sculptor's render (kit ships unpainted): the empty base, a ruined Gothic window column among rock spires on a carved plinth
Video Game Red-Cloaked Gunman Resin Garage Kit – Gold Claw Gauntlet, Torn Cloak & Ruined Gothic Window Base, Both Gun Hands Included (Unpainted, 28 Pieces)

Video Game Red-Cloaked Gunman Resin Garage Kit – Gold Claw Gauntlet, Torn Cloak & Ruined Gothic Window Base, Both Gun Hands Included (Unpainted, 28 Pieces)

$137.00
KitFull kit with both gun hands, 28 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 28 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the red-cloaked gunman from a classic role-playing game, crouched on top of a ruined Gothic window. One knee is up with the boot planted and the other is down, his gun hand hanging between his knees with the barrel pointing down over the edge, and his gold clawed gauntlet thrown out behind him at shoulder height. A long, torn red cloak streams out behind him and to one side, and his long spiked black hair blows up to match. A red headband sits under the hair, which falls across his face so one red eye shows above a tall red cowl closed with a stack of silver buckled straps. He wears black grained-leather clothes with silver buckles and straps across the thighs and forearm, gold shoulder plates, a long thigh holster, black boots with gold toe caps and a gold plate over one shin and knee, and on one arm a segmented gold gauntlet ending in five long claws. The base is a stone column holding a pointed-arch window with broken round tracery, cross mullions and cracked glass, capped with stone blocks, among jagged rock spires on a rectangular plinth carved with a stepped pattern. Both gun hands are in the box, so you can swap them as you like: the long engraved pistol shown on the figure in the renders, and a triple-barrel revolver with a hanging chain charm.

What's in the kit

  • 28 resin pieces in total. Both gun hands are in the box.
  • Figure, 17 pieces: head, hair, the cowl with the short shoulder cape, torso, both arms (one in the gold claw gauntlet), two gold shoulder plates, legs, two boots, the gold shin plate, the thigh holster and the long cloak in four sections.
  • Gun hands, 3 pieces: the right hand holding the long engraved pistol, the right hand holding the triple-barrel revolver, and the revolver's hanging chain charm.
  • Base, 8 pieces: the window column and rock spires in six sections, the broken window tracery panel and a stone block.
  • Studio size: 1:6 scale, 345 mm (13.58 in) tall, 190 mm (7.48 in) wide and 285 mm (11.22 in) deep (from Tanuki Figures' printing and scale guide).
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The cloak comes in four large, thin torn sections that make up most of the silhouette. Dry-fit all four against the photos and pin each join.
  • He crouches on the window column, so build the base first, then pin the boots and knee into the stone cap.
  • The gauntlet claws, the hair spikes, the torn cloak edges and the revolver's chain charm are thin and fragile.
  • The window tracery is an open, thin panel. Fit it into the column before the stone cap goes on.
  • Both gun hands are in the kit. Leave the wrist joint unglued (a pin holds it) if you want to swap them later.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like