Sculptor's render of the painted design (kit ships unpainted): front view of the winged figure with one hand on a spiked mace, on the broken stone pedestal

Comic Book Winged Heroine Resin Garage Kit – Feathered Wings, Spiked Mace & Broken Stone Pedestal (Unpainted, 12 Pieces)

Full kit, 12 pieces
$120.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the winged figure with one hand on a spiked mace, on the broken stone pedestal
  • Sculptor's render of the painted design (kit ships unpainted): front view of the winged figure with one hand on a spiked mace, on the broken stone pedestal
  • Sculptor's render (kit ships unpainted): low front view with the wings spread wide and her gaze turned to one side
  • Sculptor's render (kit ships unpainted): three-quarter view from her right with one wing spread toward the camera
  • Sculptor's render (kit ships unpainted): side view showing how far the wing sweeps back and the mace standing in front of her
  • Sculptor's render (kit ships unpainted): high-angle view showing the cracked top of the pedestal and the mace resting on a broken slab
  • Sculptor's render (kit ships unpainted): close-up of the face, crop top, belt buckle and wings
  • Sculptor's render (kit ships unpainted): close-up of the face and the gold-collared crop top
  • Sculptor's render of the painted design (kit ships unpainted): front view of the winged figure with one hand on a spiked mace, on the broken stone pedestal
  • Sculptor's render (kit ships unpainted): low front view with the wings spread wide and her gaze turned to one side
  • Sculptor's render (kit ships unpainted): three-quarter view from her right with one wing spread toward the camera
  • Sculptor's render (kit ships unpainted): side view showing how far the wing sweeps back and the mace standing in front of her
  • Sculptor's render (kit ships unpainted): high-angle view showing the cracked top of the pedestal and the mace resting on a broken slab
  • Sculptor's render (kit ships unpainted): close-up of the face, crop top, belt buckle and wings
  • Sculptor's render (kit ships unpainted): close-up of the face and the gold-collared crop top
Comic Book Winged Heroine Resin Garage Kit – Feathered Wings, Spiked Mace & Broken Stone Pedestal (Unpainted, 12 Pieces)

Comic Book Winged Heroine Resin Garage Kit – Feathered Wings, Spiked Mace & Broken Stone Pedestal (Unpainted, 12 Pieces)

$120.00
KitFull kit, 12 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 12 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the winged heroine from a long-running American comic book universe. She stands at rest on a broken stone pedestal, her right hand on the pommel of a spiked mace whose head rests in a heap of broken slab, her left hand on her hip and her left boot up on a raised block. Two large white feathered wings spread high and wide behind her, and her copper-red hair sweeps straight up off her head. She wears a green crop top with a gold collar and trim, green pants, a gold belt with a round red buckle and knee-high red stiletto boots. This kit has the unmasked head.

What's in the kit

  • 12 resin pieces in total.
  • Figure, 7 pieces: head with the hair, torso, two arms, both legs as a single piece and two boots.
  • Wings, 2 pieces: the left wing and the right wing, each a single piece.
  • Mace, 1 piece: the spiked mace.
  • Base, 2 pieces: the stone pedestal in two halves.
  • Tallest single piece: one of the wings, 169.4 mm (6.67 in) in the sculptor's file. The sculptor doesn't publish an assembled size, so I don't list one.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The wings are large and stand well out from her back. Pin both into the torso.
  • She stands on one flat boot and one stiletto heel on the raised block. Pin both boots into the base and into the legs.
  • The mace meets her hand at the pommel and the broken slab at the ball. Dry-fit the figure on the base with the mace in place before gluing the arm.
  • The pedestal comes in two halves. Glue and fill that seam first.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like