Sculptor's render of the painted design (kit ships unpainted): full front view of the blonde armored swordswoman resting her hand on a planted long sword, with swords and blue crystals on the round carved base (breastplate figure)

Anime Blonde Armored Swordswoman Resin Garage Kit – Planted Swords, Blue Crystals & Carved Drum Base, Two Complete Figures in Breastplate and Bodice (Unpainted, 95 Pieces)

Both outfits bundle, two complete figures, 95 pieces
$158.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the blonde armored swordswoman resting her hand on a planted long sword, with swords and blue crystals on the round carved base (breastplate figure)
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the blonde armored swordswoman resting her hand on a planted long sword, with swords and blue crystals on the round carved base (breastplate figure)
  • Sculptor's render (kit ships unpainted): the same full front view with the blue cloth bodice and cross pendant (bodice figure)
  • Sculptor's render (kit ships unpainted): front three-quarter view showing the hip plates standing off the skirt and the crossguard of the long sword
  • Sculptor's render (kit ships unpainted): three-quarter view from her right, the gauntleted right arm hanging and the front drape panel of the skirt
  • Sculptor's render (kit ships unpainted): front three-quarter view of the bodice figure with the long sword planted in front of her
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the skirt with its lace hem and a cluster of planted swords
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the bodice figure, the braided bun and the planted swords
  • Sculptor's render (kit ships unpainted): rear view with the hair ribbon, the fur ruff and every planted sword around the base
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the blonde armored swordswoman resting her hand on a planted long sword, with swords and blue crystals on the round carved base (breastplate figure)
  • Sculptor's render (kit ships unpainted): the same full front view with the blue cloth bodice and cross pendant (bodice figure)
  • Sculptor's render (kit ships unpainted): front three-quarter view showing the hip plates standing off the skirt and the crossguard of the long sword
  • Sculptor's render (kit ships unpainted): three-quarter view from her right, the gauntleted right arm hanging and the front drape panel of the skirt
  • Sculptor's render (kit ships unpainted): front three-quarter view of the bodice figure with the long sword planted in front of her
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the skirt with its lace hem and a cluster of planted swords
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the bodice figure, the braided bun and the planted swords
  • Sculptor's render (kit ships unpainted): rear view with the hair ribbon, the fur ruff and every planted sword around the base
Anime Blonde Armored Swordswoman Resin Garage Kit – Planted Swords, Blue Crystals & Carved Drum Base, Two Complete Figures in Breastplate and Bodice (Unpainted, 95 Pieces)

Anime Blonde Armored Swordswoman Resin Garage Kit – Planted Swords, Blue Crystals & Carved Drum Base, Two Complete Figures in Breastplate and Bodice (Unpainted, 95 Pieces)

$158.00
KitBoth outfits bundle, two complete figures, 95 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 95 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A bundle of two complete fan-art statues of the blonde sword-wielding heroine of a long-running fantasy anime franchise, one in each of her two outfits, each on its own base. She stands square to the viewer, her gauntleted left hand resting on the pommel of a long sword with a gold crossguard and a blue rune-lit blade, driven point-down into the ground in front of her. Her right arm hangs loose at her side. Her pale blonde hair is gathered into a braided bun with a dark blue ribbon, with a single lock standing up on top. She wears a high steel gorget with gold medallions, a white fur ruff, puffed blue-violet sleeves with gold piping, a steel waist plate with a glowing blue emblem wrapped in leather belts, two large riveted hip plates, and a long navy skirt over a white lace underskirt, with dark steel greaves and armored shoes. The base is a round drum with a carved scrollwork band, a rocky top, seven plain swords planted at angles around her and six clusters of blue crystal growing between them. The two figures are the same apart from the torso, head and hair: one wears a steel breastplate, the other a blue cloth bodice with white lapels and a small cross pendant. Each figure also comes with a second head, an alternate face with its own hair, that isn't shown in the photos; swap them as you like.

What's in the kit

  • 95 resin pieces in total.
  • Breastplate figure, 47 pieces: the torso with the steel breastplate, two heads (the face in the photos and an alternate face), each with its own front hair and back hair with the bun, plus its own full set of the shared parts below.
  • Bodice figure, 48 pieces: the torso with the cloth bodice and lapels, two heads (the face in the photos and an alternate face), each with its own front hair and back hair with the bun, and the small cross pendant, plus its own full set of the shared parts below.
  • Shared parts, in each figure: the body in 22 pieces (hips, two thighs, two lower legs with greaves, two armored shoes, two small knee plates, two arms, two arm plates, one of them the segmented vambrace, the gauntleted left hand, a small waist plate, the two hip plate stacks, the belts, the steel gorget, the fur ruff, the hair ribbon and the long sword), the skirt in 4 pieces (the upper skirt, the lower skirt with its lace hem, the front drape panel and the back cloth piece) and the base in 14 pieces (the round carved drum base, seven planted swords and six blue crystal clusters).
  • Each figure is the size given here. Tallest single piece: the long sword, 172.2 mm (6.78 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Round base, one for each figure: 118.8 × 125.1 mm (4.68 × 4.93 in) across in the sculptor's file. The skirt and some of the planted swords reach out past its edge.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The long sword runs from her left hand down into the base, so the hand, the arm and the socket in the base have to line up at once. Dry-fit them together and pin the blade.
  • The hips, waist plate, belts, both hip plate stacks, both skirt pieces and the two cloth panels all stack around one joint. Dry-fit the whole midsection before gluing, and plan to fill the seams between the hip plates and the skirt.
  • The seven planted swords and the long sword have long, thin blades that warp easily. Set the planted swords at the angles in the photos.
  • The gorget, hair ribbon, knee plates and the bodice figure's cross pendant are tiny. Use tweezers, and keep the two figures' parts in separate trays: the torsos, heads and hair differ.
  • Each figure has two heads with their own hair. Pin the head without glue if you want to swap them.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Hybris 3D Studios. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Hybris 3D Studios' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like