Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the blue-haired swordsman grinning, sword arm straight out, on the rubble base with the red pillar, giant bone jaw and blue flames

Anime Blue-Haired Swordsman Resin Garage Kit – Giant Bone Jaw, Broken Red Pillar & Blue Flame Rubble Base, Grinning and Snarling Heads Both Included (Unpainted, 18 Pieces)

Full kit with both heads, 18 pieces
$122.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the blue-haired swordsman grinning, sword arm straight out, on the rubble base with the red pillar, giant bone jaw and blue flames
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the blue-haired swordsman grinning, sword arm straight out, on the rubble base with the red pillar, giant bone jaw and blue flames
  • Sculptor's render (kit ships unpainted): closer front view of the grinning head, open white jacket and studded belts
  • Sculptor's render (kit ships unpainted): front view with the second, snarling head
  • Sculptor's render (kit ships unpainted): side view showing the forward lean of the stance and the level sword
  • Sculptor's render (kit ships unpainted): side view from the other side with the blue scabbard and the flames at his boots
  • Sculptor's render (kit ships unpainted): rear view of the rubble base, the white jacket and the outstretched sword arm
  • Sculptor's render (kit ships unpainted): close-up of the grinning face with the bone fragment over the jaw and the scar on his chest
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the blue-haired swordsman grinning, sword arm straight out, on the rubble base with the red pillar, giant bone jaw and blue flames
  • Sculptor's render (kit ships unpainted): closer front view of the grinning head, open white jacket and studded belts
  • Sculptor's render (kit ships unpainted): front view with the second, snarling head
  • Sculptor's render (kit ships unpainted): side view showing the forward lean of the stance and the level sword
  • Sculptor's render (kit ships unpainted): side view from the other side with the blue scabbard and the flames at his boots
  • Sculptor's render (kit ships unpainted): rear view of the rubble base, the white jacket and the outstretched sword arm
  • Sculptor's render (kit ships unpainted): close-up of the grinning face with the bone fragment over the jaw and the scar on his chest
Anime Blue-Haired Swordsman Resin Garage Kit – Giant Bone Jaw, Broken Red Pillar & Blue Flame Rubble Base, Grinning and Snarling Heads Both Included (Unpainted, 18 Pieces)

Anime Blue-Haired Swordsman Resin Garage Kit – Giant Bone Jaw, Broken Red Pillar & Blue Flame Rubble Base, Grinning and Snarling Heads Both Included (Unpainted, 18 Pieces)

$122.00
KitFull kit with both heads, 18 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 18 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the wild, blue-haired swordsman from a long-running supernatural sword-fighting anime. He stands in a wide, low stance across two levels of broken rock, his right arm thrown straight out with a long sword held level and his left hand shoved in his trouser pocket, leaning forward as if just after a swing. His spiky hair is two shades of blue, swept back off the forehead, with green-teal marks under light blue eyes, and a bone fragment shaped like a row of teeth curls over his right jaw. He wears a short white jacket with a wide black collar and dark cuffs, open over a black sleeveless top that shows a long scar down his chest, glossy black trousers, black boots and two white studded belts across his hips, with a blue scabbard at his left hip. Behind him a snapped red pillar leans out of the rubble, in front of it lies a huge bone jaw with a full row of teeth and a number carved on top, and blue flames rise around the rocks and his boots. Both heads are in the box, to swap as you like: a wide, toothy grin, and a tighter snarl through gritted teeth with the brow pulled down.

What's in the kit

  • 18 resin pieces in total.
  • Figure, 11 pieces: two heads (a wide, toothy grin and a gritted-teeth snarl), the bone fragment for the cheek, torso, two arms, the right hand with the sword, the left hand, the legs and two boots.
  • Scabbard, 1 piece: the blue scabbard.
  • Base, 6 pieces: three rubble sections, the red pillar, the bone jaw and a plug.
  • Tallest single piece: the legs, 157.7 mm (6.21 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Largest rubble section: 183.4 × 158.3 mm (7.22 × 6.23 in) across in the sculptor's file. The pillar and the bone jaw sit beside it and widen the base.
  • The sword, cast with the hand that holds it, is 187.7 mm (7.39 in) long in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The base is the heaviest part of the kit: three rubble sections, the pillar and the bone jaw. Dry-fit and glue the base first so the boots land where the stance needs them.
  • He stands on two boots across two levels of rock with his weight forward. Pin both boots into the rubble and the legs into the boots.
  • The sword arm reaches straight out with a long, thin blade cast as a single piece with the hand. Pin the shoulder and the wrist.
  • The bone fragment for the cheek is tiny and thin; fit it with tweezers. The scabbard is a thin rod. Both heads fit the same neck, so dry-fit the one you want before gluing.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Lion Realm Studio. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like