Sculptor's render of the painted design (kit ships unpainted): front full view of the card mage standing on the round cracked-stone plinth, one hand behind her head and one on her waist, with broken wall pieces on either side

Anime Card Mage Resin Garage Kit – Feather Bag, Card in Hand & Cracked Stone Plinth with Broken Wall (Unpainted, 15 Pieces)

Full kit, 15 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front full view of the card mage standing on the round cracked-stone plinth, one hand behind her head and one on her waist, with broken wall pieces on either side
  • Sculptor's render of the painted design (kit ships unpainted): front full view of the card mage standing on the round cracked-stone plinth, one hand behind her head and one on her waist, with broken wall pieces on either side
  • Sculptor's render (kit ships unpainted): three-quarter full view from her right, with the blue-grey feather bag hanging at her hip
  • Sculptor's render (kit ships unpainted): three-quarter full view from the other side, showing the raised elbow, the long wavy hair and the carved tablet on the plinth
  • Sculptor's render (kit ships unpainted): close-up from the head to the thighs, with the armbands, bangles, strap and pink belt
  • Sculptor's render (kit ships unpainted): closer three-quarter view of the smile, the raised arm and the feather texture on the bag
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the playing card held behind her head and the broken wall from behind
  • Sculptor's render (kit ships unpainted): back view of the long hair, the card behind her head and both wall pieces
  • Sculptor's render of the painted design (kit ships unpainted): front full view of the card mage standing on the round cracked-stone plinth, one hand behind her head and one on her waist, with broken wall pieces on either side
  • Sculptor's render (kit ships unpainted): three-quarter full view from her right, with the blue-grey feather bag hanging at her hip
  • Sculptor's render (kit ships unpainted): three-quarter full view from the other side, showing the raised elbow, the long wavy hair and the carved tablet on the plinth
  • Sculptor's render (kit ships unpainted): close-up from the head to the thighs, with the armbands, bangles, strap and pink belt
  • Sculptor's render (kit ships unpainted): closer three-quarter view of the smile, the raised arm and the feather texture on the bag
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the playing card held behind her head and the broken wall from behind
  • Sculptor's render (kit ships unpainted): back view of the long hair, the card behind her head and both wall pieces
Anime Card Mage Resin Garage Kit – Feather Bag, Card in Hand & Cracked Stone Plinth with Broken Wall (Unpainted, 15 Pieces)

Anime Card Mage Resin Garage Kit – Feather Bag, Card in Hand & Cracked Stone Plinth with Broken Wall (Unpainted, 15 Pieces)

$97.00
KitFull kit, 15 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 15 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the card-reading mage from a long-running fantasy anime about a guild of wizards. She stands in a relaxed pose with her weight on one leg, one arm raised and bent behind her head with a playing card between her fingers, and the other hand resting on her waist, her head tipped a little to the side with a small closed-mouth smile. She has long, wavy brown hair falling past her shoulder blades, large red-brown eyes and a dark blue guild mark low on her stomach. She wears her usual outfit: a teal bikini top, a pale strap across her body to a bag made of blue-grey feathers at her hip, black armbands with silver edges, a stack of silver bangles, a low dusty-pink belt with a silver buckle, rust-brown capri pants with turned cuffs and strappy dark brown sandals. The base is a round stone plinth with a worn flagstone top, glowing cracks and three playing cards lying on it, a scrolled band around the side and a small carved emblem tablet at the front, with a broken wall slab carved with the same emblem on one side of her and a heap of broken masonry on the other.

What's in the kit

  • 15 resin pieces in total.
  • Figure, 11 pieces: head, the hair in two sections, torso with the top and strap, hips and capri pants with the belt, two lower legs with sandals, two arms and two hands, one holding the card.
  • Feather bag, 1 piece.
  • Base, 3 pieces: the round plinth with the cards and the emblem tablet, the broken wall slab and the heap of masonry.
  • Studio scale: 1:6 (from 3DMoon's store page for this model).
  • Tallest single piece: the main hair section, 103.9 mm (4.09 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Plinth: 118.2 × 125.3 mm (4.65 × 4.93 in) across in the sculptor's file.
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The whole figure stands on two slim lower legs, with the pants, torso, hair and bag above them. Pin the standing leg into the plinth and both lower legs into the pants.
  • The raised arm, the hand holding the card and the back of the hair all meet behind the head. Dry-fit them together before gluing any of them.
  • The two wall pieces stand close to her feet on either side. Dry-fit them against the figure before you glue them to the plinth.
  • Small, sharp details: the feather tips on the bag, the card, the curled ends of the hair, the sandal straps and the short metal rods on the broken wall.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like