Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the whole scene, the winged archer in gold armor drawing a bow on the stone floor in front of the ruined wall and columns

Chibi Golden Archer Resin Garage Kit – Gold Armor, Feathered Wings, Drawn Bow & Ruined Stone Wall Base (Unpainted, 14 Pieces)

Full kit, 14 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the whole scene, the winged archer in gold armor drawing a bow on the stone floor in front of the ruined wall and columns
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the whole scene, the winged archer in gold armor drawing a bow on the stone floor in front of the ruined wall and columns
  • Sculptor's render (kit ships unpainted): straight-on front view with both gold wings spread wide and the bow turned edge-on
  • Sculptor's render (kit ships unpainted): front view from a little lower, with the carved tablet on the wall behind him and both heel winglets
  • Sculptor's render (kit ships unpainted): side profile with the bow pushed forward, the drawing arm pulled back and the spiral relief on the knee guards
  • Sculptor's render (kit ships unpainted): rear three-quarter view showing the backs of the wings and the plain flat back of the wall
  • Sculptor's render (kit ships unpainted): close-up of the ruined wall alone, with its fluted columns, carved tablet and the small gold arrow lodged in the stone
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the whole scene, the winged archer in gold armor drawing a bow on the stone floor in front of the ruined wall and columns
  • Sculptor's render (kit ships unpainted): straight-on front view with both gold wings spread wide and the bow turned edge-on
  • Sculptor's render (kit ships unpainted): front view from a little lower, with the carved tablet on the wall behind him and both heel winglets
  • Sculptor's render (kit ships unpainted): side profile with the bow pushed forward, the drawing arm pulled back and the spiral relief on the knee guards
  • Sculptor's render (kit ships unpainted): rear three-quarter view showing the backs of the wings and the plain flat back of the wall
  • Sculptor's render (kit ships unpainted): close-up of the ruined wall alone, with its fluted columns, carved tablet and the small gold arrow lodged in the stone
Chibi Golden Archer Resin Garage Kit – Gold Armor, Feathered Wings, Drawn Bow & Ruined Stone Wall Base (Unpainted, 14 Pieces)

Chibi Golden Archer Resin Garage Kit – Gold Armor, Feathered Wings, Drawn Bow & Ruined Stone Wall Base (Unpainted, 14 Pieces)

$65.00
KitFull kit, 14 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 14 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the winged golden archer from a classic 1980s anime about armored warriors, caught mid-draw. He stands in a wide, braced stance, front knee bent and back leg straight, his right fist pulled back to his shoulder holding the arrow's nock and his left arm pushing a long gold bow out to the side, the barbed arrowhead reaching past it. Almost everything he wears is gold armor: a helmet with a tall blade-shaped crest, swept wing-shaped side guards and hooked cheek guards; upswept shoulder guards with scroll relief on a raised collar; a breastplate with a small shield-shaped emblem and a banded, wavy-edged abdomen; a waist plate with a pointed scroll emblem; engraved forearm guards over bare upper arms; layered thigh plates, round knee guards with a spiral relief, greaves, and heeled boots with a thin winglet rising off each heel. A crimson bodysuit shows at the thighs. Spiky brown hair falls over the helmet band, and his blue eyes cut sideways along the arrow. Two wings of long, flat feather blades sweep up and out behind his shoulders, with shorter feather sprays fanning out at hip level. He stands on a floor of cut stone blocks, two courses deep, with cracked and chipped edges and a few loose pebbles. Behind him is a broken stone wall between two fluted columns, with a smooth tablet carved with three lines of Greek lettering and a small gold arrow lodged in the stone beside it.

What's in the kit

  • 14 resin pieces in total.
  • Figure, 10 pieces: the head with face and hair, the helmet, the armored torso, the legs as a single piece, the drawing arm with the arrow, the bow arm with the bow, two shoulder guards and two wings.
  • Base, 4 pieces: the stone floor in two halves, the ruined wall with its columns and carved tablet, and the small arrow lodged in the wall.
  • Tallest single piece: the legs, 90.3 mm (3.56 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Stone floor: 135.2 × 112.0 mm (5.32 × 4.41 in) across, from the sculptor's single-piece file of the same floor.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The bow tapers to fine points, and the arrow on the drawing arm is the thinnest long part in the kit. Both need careful support removal.
  • The arrow passes the bow hand, so the two arms have to line up in the air with nothing else holding them. Dry-fit both arms before gluing either.
  • The wings are wide, thin feather blades that hang off the back. Pin them. The helmet is a thin shell with a pointed crest, and the heel winglets are thin fins.
  • The stone floor comes in two halves, so there is a seam across the blocks to fill. The wall arrow is tiny and easy to lose.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like