Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the white-haired elf mage looking over her shoulder, the red staff across her body, above a glowing blue petal cloud on a rocky base

Anime Elf Mage Resin Garage Kit – Crescent Staff, White Capelet & Blue Magic Petal Cloud Base (Unpainted, 25 Pieces)

Full kit, 25 pieces
$127.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the white-haired elf mage looking over her shoulder, the red staff across her body, above a glowing blue petal cloud on a rocky base
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the white-haired elf mage looking over her shoulder, the red staff across her body, above a glowing blue petal cloud on a rocky base
  • Sculptor's render (kit ships unpainted): front three-quarter view from her right, the staff's crescent head at one side and one boot raised behind her
  • Sculptor's render (kit ships unpainted): rear three-quarter view showing the twin hair tails, both hands on the staff and the raised boot
  • Sculptor's render (kit ships unpainted): straight-on back view showing the striped top under the capelet and the staff head to one side
  • Sculptor's render (kit ships unpainted): close-up of the face, pointed ear and red earring, with the gold crescent staff head and red orb
  • Sculptor's render (kit ships unpainted): low-angle close-up of her looking back over her shoulder, white hair sweeping across, hands on the staff
  • Sculptor's render (kit ships unpainted): rear close-up from the hair tails down to the boots, with the crescent staff head and the blue petals below
  • Sculptor's render (kit ships unpainted): close-up of the base: the boots over the blue petal cloud, gray rock, grass and small blue flowers
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the white-haired elf mage looking over her shoulder, the red staff across her body, above a glowing blue petal cloud on a rocky base
  • Sculptor's render (kit ships unpainted): front three-quarter view from her right, the staff's crescent head at one side and one boot raised behind her
  • Sculptor's render (kit ships unpainted): rear three-quarter view showing the twin hair tails, both hands on the staff and the raised boot
  • Sculptor's render (kit ships unpainted): straight-on back view showing the striped top under the capelet and the staff head to one side
  • Sculptor's render (kit ships unpainted): close-up of the face, pointed ear and red earring, with the gold crescent staff head and red orb
  • Sculptor's render (kit ships unpainted): low-angle close-up of her looking back over her shoulder, white hair sweeping across, hands on the staff
  • Sculptor's render (kit ships unpainted): rear close-up from the hair tails down to the boots, with the crescent staff head and the blue petals below
  • Sculptor's render (kit ships unpainted): close-up of the base: the boots over the blue petal cloud, gray rock, grass and small blue flowers
Anime Elf Mage Resin Garage Kit – Crescent Staff, White Capelet & Blue Magic Petal Cloud Base (Unpainted, 25 Pieces)

Anime Elf Mage Resin Garage Kit – Crescent Staff, White Capelet & Blue Magic Petal Cloud Base (Unpainted, 25 Pieces)

$127.00
KitFull kit, 25 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 25 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the white-haired elf mage from a popular fantasy anime. She is caught mid-turn above a cloud of glowing blue magic petals, one boot over the cloud and the other leg bent up behind her, looking back over her shoulder at the viewer with a calm, slightly wary face. Both hands grip a long red staff that runs diagonally across the whole piece, its gold-capped end reaching out past the base on one side and its gold crescent head, set with a red orb and wrapped in a trailing red ribbon, rising above her shoulder on the other. Her long white hair is tied in two high tails that swing out sideways, and she has long pointed ears with small red teardrop earrings. She wears a white robe with a short capelet, gold piping on every hem, a gold clasp with a red stone at the throat, a black belt, gold cuffs with red stones, a black-and-white striped top that shows at the back, dark tights and brown buckled knee boots. The base is a low gray rock with tufts of grass and small blue flowers, under a large cloud of overlapping blue petals that rises in several curling arms around her legs.

What's in the kit

  • 25 resin pieces in total.
  • Figure, 12 pieces: head, a small separate hair piece, the two long hair tails, torso, capelet, skirt, legs, two boots and two arms.
  • Hands and staff, 4 pieces: the hand that carries the long staff shaft, the other hand, the staff's end cap and the crescent staff head.
  • Base, 9 pieces: the rock-and-grass footing in two halves, the petal cloud in four sections and three small scene pieces.
  • Studio size: 1:6 scale, 360 mm (14.17 in) tall, 234 mm (9.21 in) wide and 218 mm (8.58 in) deep (from Tanuki Figures' printing and scale guide).
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The figure meets the petal cloud at a single boot, with the raised leg and the long staff hanging out to the sides. Pin that boot into the cloud.
  • The staff is a thin red rod in three parts, joined end to end and held in both hands. Pin the joins and fit it before the glue on the hands sets.
  • The petal cloud comes in four large sections on a two-piece rock footing. Dry-fit all of them so the petal arms line up before gluing.
  • A blue glaze over the petal cloud gives it a glow. The hair tips, ribbon tails and small flowers are thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like