Sculptor's render of the painted design (kit ships unpainted): the hunter in a blue hoodie leaping with a hooked dagger in front of the crimson armored knight with glowing visor eyes, blue smoke between them

Anime Hoodie Hunter & Crimson Armored Knight Resin Garage Kit – Leaping Dagger Strike, Greatsword & Rubble Smoke Diorama (Unpainted, 1:10 Scale, 41 Pieces)

1:10 scale, 41 pieces
$115.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): the hunter in a blue hoodie leaping with a hooked dagger in front of the crimson armored knight with glowing visor eyes, blue smoke between them
  • Sculptor's render of the painted design (kit ships unpainted): the hunter in a blue hoodie leaping with a hooked dagger in front of the crimson armored knight with glowing visor eyes, blue smoke between them
  • Sculptor's render (kit ships unpainted): unpainted gray view of the full 1:10 diorama from the front left, the hunter leaping above the knight, whose greatsword and cape reach out to the right
  • Sculptor's render (kit ships unpainted): gray view from the front right, the hunter's foot on a rock spike and the knight's armored legs on the rubble
  • Sculptor's render (kit ships unpainted): gray side view along the greatsword, the cape and plume streaming behind the knight
  • Sculptor's render (kit ships unpainted): gray rear view of the knight's torn cape and plume, the smoke column and the hunter at upper right
  • Sculptor's render (kit ships unpainted): painted close view of the hunter's face and dagger beside the knight's crimson helmet
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 scale diorama with the studio's height, width and length, and its 41 split parts laid out (the miniature and busts shown on the sheet are sold as separate listings)
  • Sculptor's render of the painted design (kit ships unpainted): the hunter in a blue hoodie leaping with a hooked dagger in front of the crimson armored knight with glowing visor eyes, blue smoke between them
  • Sculptor's render (kit ships unpainted): unpainted gray view of the full 1:10 diorama from the front left, the hunter leaping above the knight, whose greatsword and cape reach out to the right
  • Sculptor's render (kit ships unpainted): gray view from the front right, the hunter's foot on a rock spike and the knight's armored legs on the rubble
  • Sculptor's render (kit ships unpainted): gray side view along the greatsword, the cape and plume streaming behind the knight
  • Sculptor's render (kit ships unpainted): gray rear view of the knight's torn cape and plume, the smoke column and the hunter at upper right
  • Sculptor's render (kit ships unpainted): painted close view of the hunter's face and dagger beside the knight's crimson helmet
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 scale diorama with the studio's height, width and length, and its 41 split parts laid out (the miniature and busts shown on the sheet are sold as separate listings)
Anime Hoodie Hunter & Crimson Armored Knight Resin Garage Kit – Leaping Dagger Strike, Greatsword & Rubble Smoke Diorama (Unpainted, 1:10 Scale, 41 Pieces)

Anime Hoodie Hunter & Crimson Armored Knight Resin Garage Kit – Leaping Dagger Strike, Greatsword & Rubble Smoke Diorama (Unpainted, 1:10 Scale, 41 Pieces)

$115.00
Kit1:10 scale, 41 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 41 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art diorama from a hugely popular hunter-and-dungeon anime, with two full figures on one base. The young hunter is in mid-leap at the top of the scene, body twisted, one arm raised back with a short hooked dagger and the other hand open and reaching forward, one leg tucked and the other stretched down to a spike of rock. He wears an everyday outfit: a blue hoodie with the sleeves pushed up and white drawstrings, its hem lifted by the leap, navy track pants and black sneakers with white laces, and his black fringe sweeps across his eyes. Below him stands his summoned knight in crimson plate armor with silver-white edging, a narrow visor with glowing eyes, a spiked crest and a long flowing plume, spiked pauldrons, a ragged ruff at the neck and chainmail at the knees. The knight holds a wide, notched greatsword engraved with runes low and out to the side, and his torn dark-red cape flares off behind him past the edge of the base. The base is a mound of broken, tilted rock slabs with jagged shards to one side and a column of smoke rising behind the hunter. This listing is the full 1:10 scale diorama; the miniature and a bust of each character are sold as separate listings.

What's in the kit

  • 41 resin pieces in total.
  • Hunter, 8 pieces: head, front hair, torso, two arms, two legs and the dagger.
  • Knight, 13 pieces: helmet, the plume in two parts, torso, hips, two arms, two legs, the greatsword in two parts and the cape in two parts.
  • Base, 20 pieces: the rock mound in 13 sections, four rocks and three smoke sections.
  • 1:10 scale: 279 mm (10.98 in) tall, 198 mm (7.80 in) wide and 316 mm (12.44 in) long (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build the base first: 13 rock sections, four rocks and three smoke sections stacked into a mound. Dry-fit it all before gluing, then add the knight, his cape and sword, and the hunter last.
  • The hunter touches the scene with one foot and is otherwise in the air. Pin that foot.
  • The greatsword and the cape each join in the middle and reach out past the base with nothing under them. Pin both joins.
  • Thin parts: the smoke sections, the dagger, the sword tip, the plume strands and the hunter's front hair.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like