Sculptor's render of the painted design (kit ships unpainted): full front view of the shaggy-haired gunman in a long coat aiming a pistol, in a ruined street corner with a brick-edged wall and glowing cyan conduits

Anime Shaggy-Haired Gunman Resin Garage Kit – Long Coat, Pistol & Cigarette, Ruined Street Corner Diorama (Unpainted, 24 Pieces)

Full kit, 24 pieces
$137.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the shaggy-haired gunman in a long coat aiming a pistol, in a ruined street corner with a brick-edged wall and glowing cyan conduits
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the shaggy-haired gunman in a long coat aiming a pistol, in a ruined street corner with a brick-edged wall and glowing cyan conduits
  • Sculptor's render (kit ships unpainted): side view with the pistol arm straight out, the coat open over a blue suit and yellow shirt, left hand in his pocket
  • Sculptor's render (kit ships unpainted): view from his left side, the pistol arm pointing toward the camera and the coat flaring behind
  • Sculptor's render (kit ships unpainted): rear view with the coat belt flying out, beside the cracked plaster and brick wall
  • Sculptor's render (kit ships unpainted): close-up of the face with a cigarette and the pistol held out, the coat sleeve lined with eyelets
  • Sculptor's render (kit ships unpainted): the base on its own, a ruined corner with a brick wall, a concrete pillar, an electrical box, a railing with glowing conduits and litter on cracked concrete
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the shaggy-haired gunman in a long coat aiming a pistol, in a ruined street corner with a brick-edged wall and glowing cyan conduits
  • Sculptor's render (kit ships unpainted): side view with the pistol arm straight out, the coat open over a blue suit and yellow shirt, left hand in his pocket
  • Sculptor's render (kit ships unpainted): view from his left side, the pistol arm pointing toward the camera and the coat flaring behind
  • Sculptor's render (kit ships unpainted): rear view with the coat belt flying out, beside the cracked plaster and brick wall
  • Sculptor's render (kit ships unpainted): close-up of the face with a cigarette and the pistol held out, the coat sleeve lined with eyelets
  • Sculptor's render (kit ships unpainted): the base on its own, a ruined corner with a brick wall, a concrete pillar, an electrical box, a railing with glowing conduits and litter on cracked concrete
Anime Shaggy-Haired Gunman Resin Garage Kit – Long Coat, Pistol & Cigarette, Ruined Street Corner Diorama (Unpainted, 24 Pieces)

Anime Shaggy-Haired Gunman Resin Garage Kit – Long Coat, Pistol & Cigarette, Ruined Street Corner Diorama (Unpainted, 24 Pieces)

$137.00
KitFull kit, 24 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 24 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the laid-back bounty hunter from a classic space-western anime. He stands side-on with his feet apart and his weight back, his right arm held straight out at shoulder height with a black pistol, his left hand pushed into his trouser pocket, and a cigarette in the corner of his mouth. His head is turned along the gun arm, chin down and eyes half-lidded under a big shaggy mop of dark green hair. A long taupe coat with a wide collar and metal eyelets hangs open and swings out behind him, its loose belt and buckle flying free at the back. Under it he wears a slate blue suit, a pale yellow shirt with the collar standing up, a dark tie, navy trousers and dark shoes. The base is the corner of a ruined building: a plastered wall breaking away into red brick, a cracked concrete pillar, a teal electrical box with cables on the wall, and a gray railing framing two conduit channels lit cyan from inside. The cracked concrete ground holds a green bottle, a broken bottle, a crushed can, brass shell casings, cigarette ends and a sheet of paper, with a rusty drain grate along the front.

What's in the kit

  • 24 resin pieces in total.
  • Figure, 13 pieces: head, cigarette, upper body with the coat front, the coat tail, the lower coat panel, the loose coat belt, two arms, the right hand with the pistol, the left hand, legs and two shoes.
  • Base, 11 pieces: the ground in three sections, the plaster and brick wall, the concrete pillar, the electrical box, the railing with the conduit channels, a bundle of conduit pipes, a bottle, a broken bottle and a crushed can.
  • Studio size: 1:6 scale, 322 mm (12.68 in) tall, 240 mm (9.45 in) wide and 233 mm (9.17 in) deep (from Tanuki Figures' printing and scale guide).
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The pistol arm is a long horizontal reach off the shoulder. Pin it.
  • The coat comes in three pieces around the upper body, and the joins cross smooth coat fabric. Plan to fill and sand those seams.
  • He stands on two shoes on the ground slab. Pin both ankles into the slab.
  • Build the corner first: lay the three ground sections flat and level, stand the wall and pillar square to each other, then add the electrical box, railing and litter. The cigarette and the flying coat belt are tiny and thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like