Sculptor's render of the painted design (kit ships unpainted): full front view of the orange-haired spellcaster holding a green fireball, sword lowered and purple cape flying, on the leafy base

Anime Orange-Haired Spellcaster Resin Garage Kit – Green Fireball, Lowered Sword, Purple Cape & Leafy Pond Base (Unpainted, 16 Pieces)

Full kit, 16 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the orange-haired spellcaster holding a green fireball, sword lowered and purple cape flying, on the leafy base
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the orange-haired spellcaster holding a green fireball, sword lowered and purple cape flying, on the leafy base
  • Sculptor's render (kit ships unpainted): three-quarter view from her right with the fireball near her face and the cape stretched out to one side
  • Sculptor's render (kit ships unpainted): full view from the other side, the fireball held out in front and the sword trailing behind
  • Sculptor's render, shown in gray (kit ships unpainted): front and rear views of the whole sculpt on its leafy base
  • Sculptor's render (kit ships unpainted): close-up of the face with a clenched grin, red-brown eyes and the green flame in the foreground
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the orange-haired spellcaster holding a green fireball, sword lowered and purple cape flying, on the leafy base
  • Sculptor's render (kit ships unpainted): three-quarter view from her right with the fireball near her face and the cape stretched out to one side
  • Sculptor's render (kit ships unpainted): full view from the other side, the fireball held out in front and the sword trailing behind
  • Sculptor's render, shown in gray (kit ships unpainted): front and rear views of the whole sculpt on its leafy base
  • Sculptor's render (kit ships unpainted): close-up of the face with a clenched grin, red-brown eyes and the green flame in the foreground
Anime Orange-Haired Spellcaster Resin Garage Kit – Green Fireball, Lowered Sword, Purple Cape & Leafy Pond Base (Unpainted, 16 Pieces)

Anime Orange-Haired Spellcaster Resin Garage Kit – Green Fireball, Lowered Sword, Purple Cape & Leafy Pond Base (Unpainted, 16 Pieces)

$65.00
KitFull kit, 16 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 16 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the fiery young sorceress from a classic 1990s fantasy comedy anime, caught in the middle of a spell. She stands in a wide stance on a patch of leafy ground, one hand raised with a ball of green fire in her open palm and the other holding a sword point-down and back, and she turns toward the flame with a clenched, fighting grin. Her long orange hair, red at the tips, streams back in separate curling locks under a black headband and a spiky topknot, and she wears gold ball earrings. A tall, stiff purple cape collar lined in navy stands up behind her head, closed at the throat by a silver clasp with a red gem, with small gold-edged shoulder plates over a short capelet that becomes two long cape wings flying out to both sides. Under it she wears a short-sleeved red tunic with a yellow front panel and white trim, two black belts with gold buckles and red and green gems, red leggings, white gloves with a gem bracelet, and white boots with turned-down cuffs set with green beads. The sword has a dark blade with a gold guard and grip. The base is an irregular slab of earth with clumps of leafy ground cover, a tall tuft of grass, a few dark rocks and a small pool of water.

What's in the kit

  • 16 resin pieces in total.
  • Figure, 9 pieces: head, front fringe, the long back hair, torso, legs, two arms and two boots.
  • Cape, 4 pieces: the two cape halves with their long trailing wings and the two shoulder plates.
  • Accessories, 2 pieces: the sword blade and the green fireball.
  • Base, 1 piece: the leafy ground with the grass tuft, rocks and pool.
  • Studio size: 167 mm (6.57 in) tall, 172 × 122 mm (6.77 × 4.80 in) footprint (from the studio's scale sheet).
  • Scale: about 1:10 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:10 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Each cape half is a large, thin curved sheet that hangs off a shoulder with nothing under it. Pin both at the shoulder, then fit the shoulder plates over the top of the cape joins.
  • The sword blade is long and very thin and sticks out from the hand at hip height. A brass pin through the guard into the hand keeps it from snapping off.
  • She stands on both boots in a wide stance. Pin the boots into the base before the rest of the figure goes on.
  • Thin parts: the hair lock tips, the fringe, the flame tips on the fireball and the blade. A green glaze over the fireball gives it a glow.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like