Anime Ponytail Girl with Glasses Resin Garage Kit – Open White Lab Coat, Hands in Pockets & Round Tiled Base (Unpainted, 14 Pieces)
Anime Ponytail Girl with Glasses Resin Garage Kit – Open White Lab Coat, Hands in Pockets & Round Tiled Base (Unpainted, 14 Pieces)
Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works
IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.
The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 14 separate pieces of plain, single-color resin. It is:
- Unassembled: you glue the pieces together yourself.
- Unprimed: it needs primer before paint.
- Unsanded: seams and surfaces need sanding.
- Unpainted: all painting is up to you.
Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.
This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.
A fan-art statue of the quiet, science-minded girl with glasses from a popular youth-drama anime. She walks with both hands in the pockets of an open white lab coat, one foot planted ahead and the other heel just lifting, while the coat tails and her long hair blow out to one side. Her head is turned slightly down, with a calm, closed-mouth expression behind thin oval glasses. Her long ash-brown hair is gathered into a high ponytail with a yellow scrunchie, with a full fringe and long locks framing her face. Under the coat she wears a school uniform: a white shirt with a red necktie, a buttoned tan vest, a navy pleated skirt, navy knee socks and brown loafers. The base is a round disc scored into square floor tiles.
What's in the kit
- 14 resin pieces in total.
- Figure, 10 pieces: head, the back of the hair with the scrunchie, the ponytail, the fringe with the face-framing locks, the upper body in the open lab coat with both arms and the hands in the pockets, the hip section under the skirt, two upper legs, and two lower legs with knee socks and loafers.
- Clothing and accessories, 3 pieces: the pleated skirt, the necktie and the glasses.
- Base, 1 piece: the round tiled disc.
- Tallest single piece: the upper body in the lab coat, 104.0 mm (4.09 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
- Round base: 112.5 mm (4.43 in) across in the sculptor's file.
- Scale: about 1:10 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:10 figures, and scale can differ from one creator to another.
About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
Skill level: beginner
- The lab coat, both arms and the hands in the pockets come as a single large piece, so there are no arm joins to hide. The coat tails flare out wide to one side; handle that part with care.
- She walks with one foot planted and the other heel lifting. The base has a socket for each loafer; pin the planted leg into the base as well.
- Each leg comes in two parts that meet at the top of the knee sock, so the seam sits along the sock edge.
- The glasses and the necktie are small, thin parts. Fit the glasses last, with tweezers.
You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.
How ordering works
Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.
Shipping and returns
- Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
- International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
- 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.
Sculptor credit and license
This sculpt is by Moon Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Moon Figures' commercial tier on Patreon. Please support the artist:
- Patreon: patreon.com/MoonFigures
- Buy the 3D files: Cults3D · Gumroad
Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.