Anime Silver-Haired Witch Resin Garage Kit – Wide Witch Hat, Wrapped Broom, Satchel & Paved Base (Unpainted, 25 Pieces)
Anime Silver-Haired Witch Resin Garage Kit – Wide Witch Hat, Wrapped Broom, Satchel & Paved Base (Unpainted, 25 Pieces)
Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works
IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.
The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 25 separate pieces of plain, single-color resin. It is:
- Unassembled: you glue the pieces together yourself.
- Unprimed: it needs primer before paint.
- Unsanded: seams and surfaces need sanding.
- Unpainted: all painting is up to you.
Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.
This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.
A fan-art statue of the silver-haired witch from a popular fantasy anime about a witch's travels. She stands on a round paved base with one hand raised to the brim of her wide witch hat and the other holding a broom low at her side, smiling, while her long hair and the tails of her coat stream out behind her as if she has just turned into the wind. The pointed hat has a wide brim, a lattice-patterned band and a string of green beads with a small leaf charm hanging from its tip, and a braid falls over one shoulder. She wears a dark plum coat with a pale lavender lining, open over a white collared blouse with a yellow ribbon tie, a pleated black skirt with a white scalloped lace hem, and short plum boots with pink turned-down cuffs and green trim. A brown satchel hangs on a cross-body strap with rolled papers tucked into its flap, and the broom's bristles are wrapped in a lavender cloth tied with a pink bow. The base is a round slab of shallow flagstones.
What's in the kit
- 25 resin pieces in total.
- Figure, 12 pieces: head, front hair with the braid, long back hair, torso in the blouse, skirt, two legs, two boots, two arms in their sleeves and the raised forearm and hand.
- Coat and hat, 3 pieces: the coat, the coat tails and the witch hat with its bead charm.
- Broom, 3 pieces: the handle, the bristle head and the cloth wrap with its bow.
- Satchel, 3 pieces: the satchel on its strap and two bundles of rolled papers.
- Small details, 3 pieces: the ribbon tie and two small trim pieces.
- Base, 1 piece: the round paved base.
- Tallest single piece: the coat, 95.4 mm (3.76 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
- Base: 122.7 × 122.8 mm (4.83 × 4.83 in) across in the sculptor's file.
- Scale: about 1:10 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:10 figures, and scale can differ from one creator to another.
About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
Skill level: advanced
- The coat is a large, thin, flaring shell with a separate tail section. Dry-fit both against the photo before gluing, and pin the coat at the shoulders.
- The broom handle is a long, thin rod held out from her side. Fit it after the arm is glued.
- The hat brim is wide and thin. Pin the hat onto the head and hair.
- Thin parts: the hair strands, the bead charm on the hat tip, the bows, the boot cuffs and the lace hem.
You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.
How ordering works
Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.
Shipping and returns
- Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
- International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
- 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.
Sculptor credit and license
This sculpt is by Moon Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Moon Figures' commercial tier on Patreon. Please support the artist:
- Patreon: patreon.com/MoonFigures
- Buy the 3D files: Cults3D · Gumroad
Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.