Sculptor's render of the painted design (kit ships unpainted): front view of the suited lawyer with the glowing sword lowered, the hooded judge spirit and its balance scales spread behind him, on the broken courtroom base

Anime Suited Lawyer Resin Garage Kit – Glowing Sword & Gavel, Hooded Judge Spirit with Scales, Broken Courtroom Base, Both Arm Poses Included (Unpainted, Full Size, 22 Pieces)

Full figure with both arm poses and the judge spirit, 22 pieces
$122.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the suited lawyer with the glowing sword lowered, the hooded judge spirit and its balance scales spread behind him, on the broken courtroom base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the suited lawyer with the glowing sword lowered, the hooded judge spirit and its balance scales spread behind him, on the broken courtroom base
  • Sculptor's render (kit ships unpainted): the same scene with the right arm raised across the chest, pointing, the glowing sword upright at his shoulder
  • Sculptor's render (kit ships unpainted): built without the spirit, holding the gavel lowered at his side
  • Sculptor's render (kit ships unpainted): built without the spirit, holding the glowing sword lowered at his side
  • Sculptor's render (kit ships unpainted): built without the spirit, with the arm raised and pointing, the gavel against his shoulder
  • Sculptor's render (kit ships unpainted): rear view of the suit jacket, the wooden balustrade and the stacked stone blocks on the base
  • Sculptor's render (kit ships unpainted): close-up of the face and the raised gavel, with the masked judge spirit behind him
  • Sculptor's render (kit ships unpainted): close-up of the six-sided base with the broken balustrade, stone blocks and the sealed document on the floor
  • Sculptor's render (kit ships unpainted): unpainted gray view of the whole scene with the judge spirit from the front
  • Studio scale sheet (kit ships unpainted): the studio's slicer screenshot of the whole scene with the judge spirit at 100% scale, 287.2 mm wide, 205.4 mm deep and 349.9 mm tall
  • Sculptor's render of the painted design (kit ships unpainted): front view of the suited lawyer with the glowing sword lowered, the hooded judge spirit and its balance scales spread behind him, on the broken courtroom base
  • Sculptor's render (kit ships unpainted): the same scene with the right arm raised across the chest, pointing, the glowing sword upright at his shoulder
  • Sculptor's render (kit ships unpainted): built without the spirit, holding the gavel lowered at his side
  • Sculptor's render (kit ships unpainted): built without the spirit, holding the glowing sword lowered at his side
  • Sculptor's render (kit ships unpainted): built without the spirit, with the arm raised and pointing, the gavel against his shoulder
  • Sculptor's render (kit ships unpainted): rear view of the suit jacket, the wooden balustrade and the stacked stone blocks on the base
  • Sculptor's render (kit ships unpainted): close-up of the face and the raised gavel, with the masked judge spirit behind him
  • Sculptor's render (kit ships unpainted): close-up of the six-sided base with the broken balustrade, stone blocks and the sealed document on the floor
  • Sculptor's render (kit ships unpainted): unpainted gray view of the whole scene with the judge spirit from the front
  • Studio scale sheet (kit ships unpainted): the studio's slicer screenshot of the whole scene with the judge spirit at 100% scale, 287.2 mm wide, 205.4 mm deep and 349.9 mm tall
Anime Suited Lawyer Resin Garage Kit – Glowing Sword & Gavel, Hooded Judge Spirit with Scales, Broken Courtroom Base, Both Arm Poses Included (Unpainted, Full Size, 22 Pieces)

Anime Suited Lawyer Resin Garage Kit – Glowing Sword & Gavel, Hooded Judge Spirit with Scales, Broken Courtroom Base, Both Arm Poses Included (Unpainted, Full Size, 22 Pieces)

$122.00
KitFull figure with both arm poses and the judge spirit, 22 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 22 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the tired-eyed defense lawyer turned fighter from a hit dark-fantasy anime about curses. He stands upright on a broken patch of courtroom floor, weight even, his left hand in his trouser pocket. He wears an open dark brown suit jacket with a woven texture, a small gold lapel pin and a few dark scuffs, an off-white shirt open at the collar with no tie, a brown belt, finely checked trousers and black shoes. His dark spiky hair is swept up and back and his heavy-lidded eyes look off to the side. In his right hand he holds either a long glowing sword with a small cross mark at the hilt or a wooden gavel with a cross carved into its head; both come in the kit. Both arm poses are in the box too, so you can build either: the arm lowered at his side, and raised across his chest with the index finger pointing. The hooded judge spirit is also included, to stand behind him or leave off: a drape of dark cloth spread wide like wings around a pale masked face with stitched-shut eyes, with a brass balance pan hanging on chains from each side. The base is a six-sided plinth of pale cracked stone splashed with red, with large sculpted lettering on the front, a broken wooden balustrade on one side, a stack of cracked stone blocks on the other and a sealed document on the floor at his feet. This listing is the full figure with the judge spirit and the courtroom base, 22 pieces. The bust is sold as a separate listing.

What's in the kit

  • 22 resin pieces in total.
  • Figure, 5 pieces: head, legs, two feet and the left arm.
  • Arm poses, 8 pieces: for the arm lowered at his side, a torso, right arm, glowing sword and gavel; for the arm raised across the chest with the finger pointing, a second torso, right arm, sword and gavel cut to match.
  • Base, 6 pieces: the six-sided base in two halves, the floor document, a plug and both balustrades (one made to carry the judge spirit, one for display without it).
  • Judge spirit, 3 pieces: the hooded cloak with the masked face, and the two hanging balance pans.
  • Studio size, with the judge spirit: 349.9 mm (13.78 in) tall, 287.2 mm (11.31 in) wide and 205.4 mm (8.09 in) deep (from the studio's scale sheet).
  • Six-sided base: 216.1 × 188.8 mm (8.51 × 7.43 in) across, from the sculptor's single-piece file of the same base.
  • Built without the judge spirit, the figure has no published height, so I don't list one.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build the base first. The two halves join front to back with a seam across the floor, so glue and fill it before the figure goes on.
  • The judge spirit's cloak is a large, thin, cupped sheet that stands behind him on its own balustrade; pin it. The balance pans hang on thin chains, the most fragile parts of the kit.
  • The glowing sword is long and thin; a glaze and gloss coat give it the glow. In the raised-arm pose the pointing finger is a thin, freestanding part.
  • Both balustrades are in the kit and they are not interchangeable: one is made to carry the judge spirit, the other is for display without it.
  • Both arm poses are in the kit. Each pose has its own torso, right arm, sword and gavel, so choose the pose before you glue the upper body.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Lion Realm Studio. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like