Sculptor's render of the painted design (kit ships unpainted): front view of the white-maned ninja on the giant red toad, the glowing sphere raised and the sword jutting from the toad's hand over the rock base

Anime White-Maned Ninja on a Giant Red Toad Resin Garage Kit – Glowing Energy Sphere, Broken Shrine Gate & Rock Diorama (Unpainted, 1:10 Scale, 47 Pieces)

1:10 scale, 47 pieces
$137.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the white-maned ninja on the giant red toad, the glowing sphere raised and the sword jutting from the toad's hand over the rock base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the white-maned ninja on the giant red toad, the glowing sphere raised and the sword jutting from the toad's hand over the rock base
  • Sculptor's render (kit ships unpainted): painted view of the ninja standing on the toad's back, the glowing sphere and teal energy ribbons above him
  • Sculptor's render (kit ships unpainted): side view with the gate wreckage, the paper lantern and the toad's pipe
  • Sculptor's render (kit ships unpainted): side view showing the toad's indigo vest, the curling smoke and the short sword
  • Sculptor's render (kit ships unpainted): rear view of the broken shrine gate, the rock spikes and the lantern
  • Sculptor's render (kit ships unpainted): close view of the grinning ninja with two fingers raised, the giant scroll on his back and the sphere above
  • Sculptor's render (kit ships unpainted): close view of the toad's face, bandaged hand and short sword in the smoke
  • Sculptor's render (kit ships unpainted): close view of the gate wreckage with the paper lantern, rope, knife and rock spikes
  • Sculptor's render (kit ships unpainted): unpainted gray front view of the whole 1:10 diorama
  • Studio scale sheet (kit ships unpainted): the 1:10 split version color-coded by part, with the studio's height, width and length
  • Studio parts sheet (kit ships unpainted): the 47 parts of the 1:10 split kit laid out
  • Sculptor's render of the painted design (kit ships unpainted): front view of the white-maned ninja on the giant red toad, the glowing sphere raised and the sword jutting from the toad's hand over the rock base
  • Sculptor's render (kit ships unpainted): painted view of the ninja standing on the toad's back, the glowing sphere and teal energy ribbons above him
  • Sculptor's render (kit ships unpainted): side view with the gate wreckage, the paper lantern and the toad's pipe
  • Sculptor's render (kit ships unpainted): side view showing the toad's indigo vest, the curling smoke and the short sword
  • Sculptor's render (kit ships unpainted): rear view of the broken shrine gate, the rock spikes and the lantern
  • Sculptor's render (kit ships unpainted): close view of the grinning ninja with two fingers raised, the giant scroll on his back and the sphere above
  • Sculptor's render (kit ships unpainted): close view of the toad's face, bandaged hand and short sword in the smoke
  • Sculptor's render (kit ships unpainted): close view of the gate wreckage with the paper lantern, rope, knife and rock spikes
  • Sculptor's render (kit ships unpainted): unpainted gray front view of the whole 1:10 diorama
  • Studio scale sheet (kit ships unpainted): the 1:10 split version color-coded by part, with the studio's height, width and length
  • Studio parts sheet (kit ships unpainted): the 47 parts of the 1:10 split kit laid out
Anime White-Maned Ninja on a Giant Red Toad Resin Garage Kit – Glowing Energy Sphere, Broken Shrine Gate & Rock Diorama (Unpainted, 1:10 Scale, 47 Pieces)

Anime White-Maned Ninja on a Giant Red Toad Resin Garage Kit – Glowing Energy Sphere, Broken Shrine Gate & Rock Diorama (Unpainted, 1:10 Scale, 47 Pieces)

$137.00
Kit1:10 scale, 47 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 47 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art diorama of the white-maned, wandering ninja master from a famous ninja anime, standing on the back of a huge red toad. He plants a wide stance on the toad's back, body turned so the giant scroll on his back faces the viewer while he grins back over his shoulder. One hand is raised in front of his face with two fingers up; the other arm is thrown up behind him holding a glowing pale-blue energy sphere, with teal ribbons of energy spiraling off it and sweeping down past the toad. His long, spiky white mane falls past his waist, he wears a horned metal headband marked with a single character, and red lines run down from his eyes. He wears an olive-green top and trousers, a red sleeveless vest with a yellow disc on the shoulder, mesh at the wrists and ankles, a metal hand guard and red wooden sandals, and the scroll on his back is a large red cylinder with a white label and rope lashings. The warty red toad wears an indigo vest with a white rope sash, has a long pipe tucked in the sash and rests one hand on a short sword whose blade juts out past the base; its other hand is bandaged. Cream smoke curls around the toad, and the base is a mound of tan rock spikes over gray rubble with the broken pieces of a red shrine gate, a knife stuck in one beam, two throwing stars and a hanging paper lantern.

This listing is the full 1:10 scale diorama, 341 mm tall on the studio's scale sheets. The miniature of the whole scene and the bust of the ninja are sold as separate listings.

What's in the kit

  • 47 resin pieces in total.
  • Ninja, 12 pieces: head, two front hair locks, the long mane, torso with the vest, two arms, trousers, two feet with sandals, the cloth tail and the giant scroll.
  • Toad, 16 pieces: head in three sections, body in seven sections, the underside, the hind feet, two hands, the short sword and the pipe.
  • Base, 11 pieces: the rock base in eight sections, the broken shrine gate in two pieces and the lantern.
  • Effects, 8 pieces: the energy sphere, the energy ribbons in three pieces and the smoke in four pieces.
  • 1:10 scale: 341 mm (13.43 in) tall, 308 mm (12.13 in) wide and 254 mm (10.00 in) long (from the studio's scale sheets).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build from the bottom up: the eight rock sections, then the toad's fourteen head and body pieces, then the ninja. The joins have square pegs, but the seams on the toad cross smooth, warty skin and need filling.
  • The ninja stands on the sloped back of the toad with the sphere and energy ribbons held out to one side. Pin his feet into the toad and the ribbons at both ends.
  • The short sword is long and thin and juts out past the base, so fit it last. The pipe stem, the hair locks and the sandal straps are tiny.
  • The 1:10 diorama is a large, heavy build. Pin the toad's body sections as well as gluing them.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like