Studio scale and parts sheet (kit ships unpainted): the scene broken into its nine parts in gray, the same breakdown as the miniature, with the studio's sizes for the 1:10 semi-split version and for the miniature, 87 mm tall

Cartoon Airborne Acrobat Resin Garage Kit – Leap Off a Collapsing Bridge, White Energy Swirls & Arrows (Unpainted, Miniature, 10 Pieces)

Miniature, 10 pieces
$39.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the scene broken into its nine parts in gray, the same breakdown as the miniature, with the studio's sizes for the 1:10 semi-split version and for the miniature, 87 mm tall
  • Studio scale and parts sheet (kit ships unpainted): the scene broken into its nine parts in gray, the same breakdown as the miniature, with the studio's sizes for the 1:10 semi-split version and for the miniature, 87 mm tall
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the acrobat leaping off the collapsing bridge, white energy swirls around her. The miniature is the same sculpt at 87 mm tall.
  • Sculptor's render of the painted design (kit ships unpainted): front view from the other side, the fence behind her and the fallen log with its brass ring. The miniature is the same sculpt at 87 mm tall.
  • Sculptor's render of the painted design (kit ships unpainted): rear three-quarter view with the braid thrown up and a swirl curling past her. The miniature is the same sculpt at 87 mm tall.
  • Studio scale and parts sheet (kit ships unpainted): the scene broken into its nine parts in gray, the same breakdown as the miniature, with the studio's sizes for the 1:10 semi-split version and for the miniature, 87 mm tall
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the acrobat leaping off the collapsing bridge, white energy swirls around her. The miniature is the same sculpt at 87 mm tall.
  • Sculptor's render of the painted design (kit ships unpainted): front view from the other side, the fence behind her and the fallen log with its brass ring. The miniature is the same sculpt at 87 mm tall.
  • Sculptor's render of the painted design (kit ships unpainted): rear three-quarter view with the braid thrown up and a swirl curling past her. The miniature is the same sculpt at 87 mm tall.
Cartoon Airborne Acrobat Resin Garage Kit – Leap Off a Collapsing Bridge, White Energy Swirls & Arrows (Unpainted, Miniature, 10 Pieces)

Cartoon Airborne Acrobat Resin Garage Kit – Leap Off a Collapsing Bridge, White Energy Swirls & Arrows (Unpainted, Miniature, 10 Pieces)

$39.00
KitMiniature, 10 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 10 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the cheerful circus acrobat from a beloved American animated series about elemental martial arts. She is caught in mid-air, leaping off a wooden bridge that is falling apart under her: one foot pushes off the tilted plank deck, the other knee is pulled up high, her leading hand jabs straight at a brass-capped post with the fingers together, and her trailing hand flings out a long white swirl of energy that arcs up past her head. Her long brown braid, tied with red bands, flies up behind her in the same direction, and she wears a confident, closed-mouth smirk with one eyebrow raised. She wears a pink cropped top with short puffed sleeves under a pointed red-orange collar-cape, red wrist cuffs, a red sash with a split skirt panel and two loose sash tails, loose pink trousers gathered into red bands below the knee, and dark red flat shoes. The base is the whole scene: a leaning plank deck with a three-rail fence, a tall brass-capped post, a fallen log with a brass collar and ring, gray boulders in blue water with white foam, nine arrows stuck into the wood and the ground, and more white energy swirls curling around the base and her raised shin. This listing is the studio's miniature of the whole scene, 10 pieces: the same sculpt as the 1:10 statue at a smaller size, with the figure in three pieces and the arrows sculpted into the base. The studio's sheet gives the miniature as 87 mm tall. The 1:10 scale statue is sold as a separate listing.

What's in the kit

  • 10 resin pieces in total.
  • Figure, 3 pieces: head with the hair and braid, upper body with the arms, and lower body with the legs.
  • Base, 2 pieces: the ground with the log, rocks and water, and the plank deck with the fence; the arrows are sculpted in.
  • Energy swirls, 5 pieces: the four swirls, with both a long and a short version of the largest one to choose from.
  • Miniature: 87 mm (3.43 in) tall, 75 × 77 mm (2.95 × 3.03 in) footprint (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • At this size the braid, the fingers, the fence rails, the arrow shafts and the energy swirls are very thin. Take the supports off gently.
  • Dry-fit her planted foot on the tilted deck and her hand at the post before gluing.
  • The energy swirls attach at their tips to her hand, her shin and the base. Glue them last, with tweezers.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like