Sculptor's render of the painted design (kit ships unpainted): front view of the whole kit, crouched with claws out on the gray rubble heap with rusted rebar

Chibi Clawed Comic Hero Resin Garage Kit – Finned Cowl, Six Claws & Rubble Base with Rebar (Unpainted, 9 Pieces)

Full kit, 9 pieces
$75.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the whole kit, crouched with claws out on the gray rubble heap with rusted rebar
  • Sculptor's render of the painted design (kit ships unpainted): front view of the whole kit, crouched with claws out on the gray rubble heap with rusted rebar
  • Sculptor's render (kit ships unpainted): high front view looking down on the cowl and the spread of the base
  • Sculptor's render (kit ships unpainted): three-quarter view from his left with the claws angled forward
  • Sculptor's render (kit ships unpainted): left side profile showing the back of the costume and the metal disc half buried in the rocks
  • Sculptor's render (kit ships unpainted): front view at chest height showing the belt, trunks, gloves and boots
  • Sculptor's render (kit ships unpainted): low front three-quarter view of the figure against a magenta haze
  • Sculptor's render (kit ships unpainted): close-up of the snarling masked face and the glossy blue shoulder pads
  • Sculptor's render of the painted design (kit ships unpainted): front view of the whole kit, crouched with claws out on the gray rubble heap with rusted rebar
  • Sculptor's render (kit ships unpainted): high front view looking down on the cowl and the spread of the base
  • Sculptor's render (kit ships unpainted): three-quarter view from his left with the claws angled forward
  • Sculptor's render (kit ships unpainted): left side profile showing the back of the costume and the metal disc half buried in the rocks
  • Sculptor's render (kit ships unpainted): front view at chest height showing the belt, trunks, gloves and boots
  • Sculptor's render (kit ships unpainted): low front three-quarter view of the figure against a magenta haze
  • Sculptor's render (kit ships unpainted): close-up of the snarling masked face and the glossy blue shoulder pads
Chibi Clawed Comic Hero Resin Garage Kit – Finned Cowl, Six Claws & Rubble Base with Rebar (Unpainted, 9 Pieces)

Chibi Clawed Comic Hero Resin Garage Kit – Finned Cowl, Six Claws & Rubble Base with Rebar (Unpainted, 9 Pieces)

$75.00
KitFull kit, 9 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 9 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the short-tempered clawed hero from American comics, in his classic yellow-and-blue costume, dropped into a low fighting crouch with three steel claws out of each fist. His right arm hangs out to the side with the claws almost level, and his left reaches forward with the claws curving down past his knee. The yellow cowl has black mask panels that sweep up into two tall curved fins, with blank white eye lenses above a snarl of clenched, bared teeth. The sleeveless yellow suit has black pointed stripes down the front and flanks, glossy blue shoulder pads, bare upper arms, flared blue-violet gloves, a red belt with a black buckle over blue-violet trunks, and blue-violet boots with black flares rising up the thighs. He stands on a heap of cracked gray slabs and rubble over rust-brown mud, with ribbed rebar rods poking out, two bolts and a round metal disc half buried at the back.

What's in the kit

  • 9 resin pieces in total.
  • Figure, 7 pieces: the head with the finned cowl, the torso with the shoulder pads, the hips and thighs, two arms with three claws on each fist, and two boots.
  • Base, 2 pieces: the rubble heap in two halves, with the rebar and the half-buried disc sculpted in.
  • Tallest single piece: the head with its cowl fins, 75.5 mm (2.97 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Rubble base, in two halves: 86.8 × 112.8 mm (3.42 × 4.44 in) and 70.8 × 105.1 mm (2.79 × 4.14 in) across in the sculptor's files.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The six claws are sculpted onto the arms and taper to points. Support them along their length.
  • The cowl fins, the thin strap on the left boot and the rebar rods are thin parts.
  • The figure balances on two separate boots on uneven rock. Pin each boot into the base and into the legs, and dry-fit before gluing.
  • The two base halves meet along a seam through the rubble that needs filling where it crosses the smooth mud.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like