Sculptor's render of the painted design (kit ships unpainted): front view of the chibi red wyvern on a mossy rock pillar breathing a big orange fire cloud onto the ground, arrows at both sides

Video Game Chibi Red Wyvern Resin Garage Kit – Fire Breath Cloud, Mossy Rock Pillar & Three Arrows (Unpainted, 8 Pieces)

Full kit, 8 pieces
$54.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the chibi red wyvern on a mossy rock pillar breathing a big orange fire cloud onto the ground, arrows at both sides
  • Sculptor's render of the painted design (kit ships unpainted): front view of the chibi red wyvern on a mossy rock pillar breathing a big orange fire cloud onto the ground, arrows at both sides
  • Sculptor's render (kit ships unpainted): three-quarter front view with wings spread and the flame spire reaching up to his open mouth
  • Sculptor's render (kit ships unpainted): side view of the wyvern on the layered rock pillar, tail curled up and arrows at the foot of the rock
  • Sculptor's render (kit ships unpainted): low front view over the fire cloud, the wings raised behind his head
  • Sculptor's render (kit ships unpainted): front view from the left showing the cream belly, the red-orange scales and the wing claws
  • Sculptor's render (kit ships unpainted): close-up of the grinning face with green-and-orange eyes and the dark spiked crest
  • Sculptor's render (kit ships unpainted): gray front view of the whole piece with all three arrows
  • Sculptor's render (kit ships unpainted): gray view from his right side with one wing raised over the fire cloud
  • Sculptor's render (kit ships unpainted): gray rear three-quarter view of the spiked tail, the back and the rock pillar
  • Sculptor's render (kit ships unpainted): gray rear view with both wings raised, the tail club and the bushes at the back of the base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the chibi red wyvern on a mossy rock pillar breathing a big orange fire cloud onto the ground, arrows at both sides
  • Sculptor's render (kit ships unpainted): three-quarter front view with wings spread and the flame spire reaching up to his open mouth
  • Sculptor's render (kit ships unpainted): side view of the wyvern on the layered rock pillar, tail curled up and arrows at the foot of the rock
  • Sculptor's render (kit ships unpainted): low front view over the fire cloud, the wings raised behind his head
  • Sculptor's render (kit ships unpainted): front view from the left showing the cream belly, the red-orange scales and the wing claws
  • Sculptor's render (kit ships unpainted): close-up of the grinning face with green-and-orange eyes and the dark spiked crest
  • Sculptor's render (kit ships unpainted): gray front view of the whole piece with all three arrows
  • Sculptor's render (kit ships unpainted): gray view from his right side with one wing raised over the fire cloud
  • Sculptor's render (kit ships unpainted): gray rear three-quarter view of the spiked tail, the back and the rock pillar
  • Sculptor's render (kit ships unpainted): gray rear view with both wings raised, the tail club and the bushes at the back of the base
Video Game Chibi Red Wyvern Resin Garage Kit – Fire Breath Cloud, Mossy Rock Pillar & Three Arrows (Unpainted, 8 Pieces)

Video Game Chibi Red Wyvern Resin Garage Kit – Fire Breath Cloud, Mossy Rock Pillar & Three Arrows (Unpainted, 8 Pieces)

$54.00
KitFull kit, 8 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the fire-breathing red wyvern from a hit monster-hunting action game. He stands on top of a flat rock pillar with three feet planted and one front foot lifted over the edge, wings raised and spread, tail curled up behind him, head dropped and turned with his mouth open in a toothy grin under a heavy, scowling brow and big round eyes. His head carries a layered crest of dark spiked plates, with ear frills behind the cheeks, rows of small scales down the neck, a line of spikes down the back and a spiked club at the end of the tail. The fire he breathes is a big rounded cloud that has already hit the ground in front of the pillar, with a tapering spire of flame reaching back up to his mouth. The base is a layered rock pillar capped with moss, on a ground slab with flat cobbles, broad-leaf plants and two rounded bushes, and three arrows stuck in the dirt around it.

What's in the kit

  • 8 resin pieces in total.
  • Figure, 3 pieces: the wyvern's body with the head, legs and tail, and the two wings.
  • Base, 2 pieces: the mossy rock pillar on its ground slab with cobbles, plants and bushes, and the fire cloud.
  • Accessories, 3 pieces: three arrows planted in the ground.
  • Studio size: 97 mm (3.82 in) tall, 125 × 110 mm (4.92 × 4.33 in) footprint, wings and tail included (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The wings mount on the back at the shoulders and are the only hanging parts. Dry-fit them and pin them if the joint is a flat contact.
  • The fire cloud sits on its own flat pad in front of the pillar, with the flame spire reaching up to the open mouth. Place it before the wyvern goes on so the two line up.
  • The three arrows are very thin shafts. Drill small holes in the ground for them if there are none.
  • The wing membranes, the flame tips and the crest spikes are thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like