Sculptor's render of the painted design (kit ships unpainted): front view of the chibi imp playing a green flute on the tree stump, the giant spiked heart-shaped mask rising behind him; the two glowing lights are a render effect, not kit parts

Video Game Chibi Wooden Imp Resin Garage Kit – Flute, Giant Spiked Heart-Shaped Mask on a Vine & Tree Stump Base (Unpainted, 4 Pieces)

Full kit, 4 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the chibi imp playing a green flute on the tree stump, the giant spiked heart-shaped mask rising behind him; the two glowing lights are a render effect, not kit parts
  • Sculptor's render of the painted design (kit ships unpainted): front view of the chibi imp playing a green flute on the tree stump, the giant spiked heart-shaped mask rising behind him; the two glowing lights are a render effect, not kit parts
  • Sculptor's render (kit ships unpainted): four gray views, front, three-quarter, rear three-quarter and back, showing the climbing vine and the hollow heart-shaped back of the mask
  • Sculptor's photo of an unpainted print: front view on a turntable, the spiked mask filling the top of the frame above the imp and the stump
  • Sculptor's photo of an unpainted print: three-quarter view with the twisted vine sweeping from its thorny root up to the mask
  • Sculptor's photo of an unpainted print: three-quarter view from the other side, the imp on the stump in front of the mask
  • Sculptor's photo of an unpainted print: rear three-quarter view of the hollow heart-shaped back of the mask held up by the vine
  • Sculptor's photo of an unpainted print: low front view of the imp on the carved stump with the spiral-cut branch, the mask behind
  • Sculptor's photo of an unpainted print: close-up of the imp's carved wooden face, rope-tied snout and flute
  • Sculptor's render of the painted design (kit ships unpainted): front view of the chibi imp playing a green flute on the tree stump, the giant spiked heart-shaped mask rising behind him; the two glowing lights are a render effect, not kit parts
  • Sculptor's render (kit ships unpainted): four gray views, front, three-quarter, rear three-quarter and back, showing the climbing vine and the hollow heart-shaped back of the mask
  • Sculptor's photo of an unpainted print: front view on a turntable, the spiked mask filling the top of the frame above the imp and the stump
  • Sculptor's photo of an unpainted print: three-quarter view with the twisted vine sweeping from its thorny root up to the mask
  • Sculptor's photo of an unpainted print: three-quarter view from the other side, the imp on the stump in front of the mask
  • Sculptor's photo of an unpainted print: rear three-quarter view of the hollow heart-shaped back of the mask held up by the vine
  • Sculptor's photo of an unpainted print: low front view of the imp on the carved stump with the spiral-cut branch, the mask behind
  • Sculptor's photo of an unpainted print: close-up of the imp's carved wooden face, rope-tied snout and flute
Video Game Chibi Wooden Imp Resin Garage Kit – Flute, Giant Spiked Heart-Shaped Mask on a Vine & Tree Stump Base (Unpainted, 4 Pieces)

Video Game Chibi Wooden Imp Resin Garage Kit – Flute, Giant Spiked Heart-Shaped Mask on a Vine & Tree Stump Base (Unpainted, 4 Pieces)

$65.00
KitFull kit, 4 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design, plus the studio's photos of its own unpainted test prints. Your kit arrives as 4 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the mischievous masked imp from a classic fantasy adventure game. He balances on one foot on top of a splintered tree stump, his other knee hitched up high, playing a flute held sideways across his face. He has a carved wooden face with large round eyes, a short beaked snout with a rope tied across it, and a shaggy hat of overlapping straw tufts. He wears a ragged ruff, fringed gloves, a long tunic with a torn hem belted with a chain, patched trousers and pointed boots with strap wraps. Behind him a braided, thorny vine grows out of the grass and twists up to hold a giant heart-shaped mask with ten tapered spikes, two large ringed eyes, raised piping and wood grain over every surface; the back of the mask is an open, hollow cup. The base is a grassy mound on a round plinth with the broken stump and a sawn-off branch carved in a spiral. The two glowing lights floating beside him in the painted render are a render effect and are not part of the kit.

What's in the kit

  • 4 resin pieces in total.
  • Figure, 2 pieces: the head with its straw-tuft hat, and the body with the flute, tunic and boots.
  • Mask, 1 piece: the spiked heart-shaped mask with the upper part of the vine.
  • Base, 1 piece: the grassy plinth, the tree stump and the lower vine with its thorns.
  • Largest single piece: the mask with its vine, 117.0 × 127.3 mm (4.61 × 5.01 in) in the sculptor's file. The studio's size sheet doesn't give an assembled height I can confirm, so I don't list one.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The mask is the largest piece and hangs out over the figure on a single vine peg that seats into the vine stub on the base. Pin that joint.
  • He stands on one foot on a square peg in the stump top, and his head is heavier than his body. Dry-fit, then pin the foot.
  • The joins are keyed. Dry-fit all four pieces before gluing to see how the lower mask spikes sit over the hat.
  • Thin parts: the mask's spike tips, the vine loop and thorns, the flute and the hat tufts. The back of the mask is an open cup.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like