Sculptor's render of the design, shown in gray (kit ships unpainted): front view of the crowned ghost girl seated on the big marked block above the stone steps, with a tombstone, iron railings and candles around her

Video Game Crowned Ghost Girl Resin Garage Kit – Graveyard Steps, Throne Block, Two Little Ghosts & Iron Railings (Unpainted, 1:10 Scale, 23 Pieces)

1:10 scale, 23 pieces
$80.00
Skip to product information
Sculptor's render of the design, shown in gray (kit ships unpainted): front view of the crowned ghost girl seated on the big marked block above the stone steps, with a tombstone, iron railings and candles around her
  • Sculptor's render of the design, shown in gray (kit ships unpainted): front view of the crowned ghost girl seated on the big marked block above the stone steps, with a tombstone, iron railings and candles around her
  • Sculptor's render (kit ships unpainted): three-quarter view from her left, the crossed legs, heels and ruffled skirt draping over the block
  • Sculptor's render (kit ships unpainted): three-quarter view from her right with the tombstone in front and her long hair falling behind
  • Sculptor's render (kit ships unpainted): rear view of the long hair, the scrolled iron railings and the back of the tombstone
  • Studio scale sheet (kit ships unpainted): the gray sculpt with the studio's measurements for this size, 188 mm tall, 123 mm long and 135 mm wide; the small inset labeled Miniature is the miniature, sold as a separate listing
  • Studio parts sheet (kit ships unpainted): the 22 split pieces laid out (the extra third ghost in this kit is not shown); the lower panel shows the studio's unsplit file and the miniature, which are not part of this listing
  • Sculptor's render of the design, shown in gray (kit ships unpainted): front view of the crowned ghost girl seated on the big marked block above the stone steps, with a tombstone, iron railings and candles around her
  • Sculptor's render (kit ships unpainted): three-quarter view from her left, the crossed legs, heels and ruffled skirt draping over the block
  • Sculptor's render (kit ships unpainted): three-quarter view from her right with the tombstone in front and her long hair falling behind
  • Sculptor's render (kit ships unpainted): rear view of the long hair, the scrolled iron railings and the back of the tombstone
  • Studio scale sheet (kit ships unpainted): the gray sculpt with the studio's measurements for this size, 188 mm tall, 123 mm long and 135 mm wide; the small inset labeled Miniature is the miniature, sold as a separate listing
  • Studio parts sheet (kit ships unpainted): the 22 split pieces laid out (the extra third ghost in this kit is not shown); the lower panel shows the studio's unsplit file and the miniature, which are not part of this listing
Video Game Crowned Ghost Girl Resin Garage Kit – Graveyard Steps, Throne Block, Two Little Ghosts & Iron Railings (Unpainted, 1:10 Scale, 23 Pieces)

Video Game Crowned Ghost Girl Resin Garage Kit – Graveyard Steps, Throne Block, Two Little Ghosts & Iron Railings (Unpainted, 1:10 Scale, 23 Pieces)

$80.00
Kit1:10 scale, 23 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 23 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the crowned ghost girl, the fan-made twist on a classic video game ghost that puts on a magic crown. She sits sideways on a large block marked with question marks, legs crossed, one gloved hand raised in front of her and the other resting on the block, with her tongue out over a small fang. Very long hair pours out behind her in loose strands, and a small domed crown with ball-tipped points sits on top of her head. She wears a white gown with a ruffled low neckline, a frilled ruff at the throat with a small pendant, short puffed sleeves, long gloves with frilled cuffs, and a long skirt with a deep ruffled hem that opens at the front over a second ruffled underskirt, with thigh-high stockings and pointed heels. Two little round ghosts keep her company, one floating above her shoulder and one at her hip, both grinning with rows of pointed teeth and their tongues out. The base is a graveyard corner: two worn stone steps with a small marked block set into them, a rounded tombstone topped with a Celtic cross, three sections of scrolled iron railing, and two candle stacks dripping wax. This listing is the 1:10 scale statue in 23 pieces, with an extra third ghost that isn't pictured. The miniature of the same scene is sold as a separate listing.

What's in the kit

  • 23 resin pieces in total.
  • Figure, 10 pieces: torso, face, hair, crown, two hands, two frilled cuffs and two legs.
  • Ghosts, 3 pieces: the two little round ghosts and an extra third ghost (not pictured).
  • Gown, 2 pieces: the long skirt drape and the ruffled underskirt.
  • Base, 8 pieces: the stone steps, the big block she sits on, the tombstone, three iron railing sections and two candle stacks.
  • 1:10 scale: 188 mm (7.40 in) tall, 135 × 123 mm (5.31 × 4.84 in) footprint (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The 1:10 base is eight pieces: the steps, the big block, the tombstone, three railings and two candle stacks. Dry-fit them all on the steps before gluing anything.
  • The three railings are thin open lattice. Handle them by their edges and fit them last.
  • The gown joins the torso at the waist on a smooth surface. Plan to fill and sand that seam.
  • The crown, face, hands and cuffs are small parts, and the crown points, candle flames and hair strand tips are thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like