Sculptor's render of the painted design (kit ships unpainted): front view of the horned red-skinned demon woman walking out of a jagged pink portal with a huge taped crimson blade, on a broken street base with a fire hydrant

Video Game Horned Demon Woman Resin Garage Kit – Taped Crimson Blade, Glowing Portal & Broken Street Base (Unpainted, 1:10 Scale, 20 Pieces)

1:10 scale, 20 pieces
$95.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the horned red-skinned demon woman walking out of a jagged pink portal with a huge taped crimson blade, on a broken street base with a fire hydrant
  • Sculptor's render of the painted design (kit ships unpainted): front view of the horned red-skinned demon woman walking out of a jagged pink portal with a huge taped crimson blade, on a broken street base with a fire hydrant
  • Sculptor's render (kit ships unpainted): front view of the figure striding over the rubble with the blade at her side, against a painted magenta backdrop
  • Sculptor's render (kit ships unpainted): unpainted gray front view of the full sculpt with the starburst portal behind her
  • Sculptor's render (kit ships unpainted): unpainted gray three-quarter view from her right, showing the raised zigzag sigil on the portal face
  • Sculptor's render (kit ships unpainted): side view of her stride in black heels, her tail curving back to the portal rim
  • Sculptor's render (kit ships unpainted): unpainted gray three-quarter view from her left, with the tail touching the portal rim
  • Sculptor's render (kit ships unpainted): view from her right, the long pole and taped blade trailing forward past the base
  • Sculptor's render (kit ships unpainted): rear view of the portal painted black and glowing pink, with rock slabs and the hydrant at its foot
  • Sculptor's render (kit ships unpainted): unpainted gray rear view of the domed portal shell and the patterned blade
  • Studio scale and parts sheet (kit ships unpainted): the studio's sheet giving this 1:10 statue's size, 253 mm tall, 144 mm wide and 182 mm long, with its 20 split parts; the smaller versions shown are the miniature and the bust, sold as separate listings
  • Sculptor's render of the painted design (kit ships unpainted): front view of the horned red-skinned demon woman walking out of a jagged pink portal with a huge taped crimson blade, on a broken street base with a fire hydrant
  • Sculptor's render (kit ships unpainted): front view of the figure striding over the rubble with the blade at her side, against a painted magenta backdrop
  • Sculptor's render (kit ships unpainted): unpainted gray front view of the full sculpt with the starburst portal behind her
  • Sculptor's render (kit ships unpainted): unpainted gray three-quarter view from her right, showing the raised zigzag sigil on the portal face
  • Sculptor's render (kit ships unpainted): side view of her stride in black heels, her tail curving back to the portal rim
  • Sculptor's render (kit ships unpainted): unpainted gray three-quarter view from her left, with the tail touching the portal rim
  • Sculptor's render (kit ships unpainted): view from her right, the long pole and taped blade trailing forward past the base
  • Sculptor's render (kit ships unpainted): rear view of the portal painted black and glowing pink, with rock slabs and the hydrant at its foot
  • Sculptor's render (kit ships unpainted): unpainted gray rear view of the domed portal shell and the patterned blade
  • Studio scale and parts sheet (kit ships unpainted): the studio's sheet giving this 1:10 statue's size, 253 mm tall, 144 mm wide and 182 mm long, with its 20 split parts; the smaller versions shown are the miniature and the bust, sold as separate listings
Video Game Horned Demon Woman Resin Garage Kit – Taped Crimson Blade, Glowing Portal & Broken Street Base (Unpainted, 1:10 Scale, 20 Pieces)

Video Game Horned Demon Woman Resin Garage Kit – Taped Crimson Blade, Glowing Portal & Broken Street Base (Unpainted, 1:10 Scale, 20 Pieces)

$95.00
Kit1:10 scale, 20 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 20 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the red-skinned demon heroine from a recent superhero workplace comedy game. She walks out of a jagged, glowing portal onto a broken city street, mid-stride, with one black heel on the cracked slab beside a manhole cover. Her right hand grips a long dark pole low at her side, and the huge crimson blade lashed to its end with gray tape angles down past the edge of the base. Her left hand hangs loose with long black claws, and her tail swings back to rest its spade tip on the portal's rim. Two ridged charcoal horns rise from her blue-black hair, she has long pointed ears with a gold drop earring, solid glowing yellow eyes and a one-sided smirk. She wears a plain white scoop-neck tank top, frayed denim cut-off shorts and black stiletto pumps. The base is a round chunk of broken street with a manhole cover, upright rock slabs, rebar, puffs of dust, broken pipes and a fire hydrant, and the portal behind her is a tall starburst of jagged spikes with a raised sigil on its face. This listing is the 1:10 scale statue in 20 pieces. The miniature and the bust are sold as separate listings.

What's in the kit

  • 20 resin pieces in total.
  • Figure, 13 pieces: head, fringe, two hair pieces, two horns, torso, two arms, shorts, two legs and the tail.
  • Blade, 1 piece: the taped crimson blade.
  • Base and portal, 6 pieces: the street slab, the rock slabs with rebar, the fire hydrant and the portal in three sections.
  • 1:10 scale: 253 mm (9.96 in) tall, 144 × 182 mm (5.67 × 7.17 in) footprint (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • In the 1:10 kit she stands on two stiletto heels through two separate leg joins. Pin both legs into the shorts and the heels into the base.
  • The blade hangs off the end of the pole just below her fist, and its tip reaches past the edge of the base. Pin that join.
  • The 1:10 portal comes in three sections that stack with tabs and plug into the rubble; line up the spikes at each join. Her tail tip rests on the portal rim, so dry-fit the figure and the portal together before gluing either.
  • The horns, fringe, rebar ends and the portal's spiky rim are thin. A pink glaze over the portal gives it a glow.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like