Sculptor's render of the painted design (kit ships unpainted): front full view of the red-haired woman leaning on her shotgun in front of the ruined wall panel and monitor

Video Game Special Forces Woman Resin Garage Kit – Pump Shotgun, Tactical Bodysuit & Overgrown Ruins Base (Unpainted, 23 Pieces)

Full kit, 23 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front full view of the red-haired woman leaning on her shotgun in front of the ruined wall panel and monitor
  • Sculptor's render of the painted design (kit ships unpainted): front full view of the red-haired woman leaning on her shotgun in front of the ruined wall panel and monitor
  • Sculptor's render (kit ships unpainted): three-quarter view with the shotgun at her side and the green-lit monitor behind her
  • Sculptor's render (kit ships unpainted): three-quarter view from a higher angle, with the leaning panel and plants
  • Sculptor's render (kit ships unpainted): side view showing the depth of the wall panel and the hazard-striped slab
  • Sculptor's render (kit ships unpainted): rear view of the vest straps, the back of the scenery and the vines
  • Sculptor's render (kit ships unpainted): close-up of the face, freckles, vest, bandolier and belt buckle
  • Sculptor's render (kit ships unpainted): close-up of the boots on the grating slab, the hazard stripe and the rusted ring of the base
  • Sculptor's render of the painted design (kit ships unpainted): front full view of the red-haired woman leaning on her shotgun in front of the ruined wall panel and monitor
  • Sculptor's render (kit ships unpainted): three-quarter view with the shotgun at her side and the green-lit monitor behind her
  • Sculptor's render (kit ships unpainted): three-quarter view from a higher angle, with the leaning panel and plants
  • Sculptor's render (kit ships unpainted): side view showing the depth of the wall panel and the hazard-striped slab
  • Sculptor's render (kit ships unpainted): rear view of the vest straps, the back of the scenery and the vines
  • Sculptor's render (kit ships unpainted): close-up of the face, freckles, vest, bandolier and belt buckle
  • Sculptor's render (kit ships unpainted): close-up of the boots on the grating slab, the hazard stripe and the rusted ring of the base
Video Game Special Forces Woman Resin Garage Kit – Pump Shotgun, Tactical Bodysuit & Overgrown Ruins Base (Unpainted, 23 Pieces)

Video Game Special Forces Woman Resin Garage Kit – Pump Shotgun, Tactical Bodysuit & Overgrown Ruins Base (Unpainted, 23 Pieces)

$97.00
KitFull kit, 23 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 23 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the red-haired special forces agent from a classic survival-horror video game. She stands relaxed with her weight on one leg and the other crossed loosely in front, one gloved hand resting on a pump shotgun propped beside her and the other raised to her collar near the zip, with a small closed-mouth smile. She has a short red bob with long side bangs and freckles, and wears a gray tactical bodysuit zipped up the front, a black leather vest and harness, a bandolier of shotgun shells across the chest, a wide belt with a big buckle and hip pouches, fingerless gloves, a thigh holster with buckled straps, riveted knee pads and lace-up combat boots. The base is a diorama: an octagonal metal grating slab with a hazard-stripe edge on a rusted round ring, a torn sheet-metal wall panel with a small green-lit monitor, a rusted truss girder, a second leaning panel, climbing vines and three leafy plants.

What's in the kit

  • 23 resin pieces in total.
  • Figure, 13 pieces: head, hair in two pieces, torso with the vest and harness, two arms, the hand holding the shotgun, the raised hand, two legs, two boots and the thigh holster.
  • Base, 7 pieces: the slab in two halves and five scenery sections (wall panels, monitor, truss and vines).
  • Plants, 3 pieces: three leafy plants.
  • Studio scale: 1:6 (from 3DMoon's store page for this model).
  • Longest single piece: a scenery section of the base, 142.3 mm (5.60 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Seven base and scenery pieces stack into a tall backdrop. Dry-fit the whole base before glue, because small errors at the bottom show at the top.
  • Only one boot carries her weight, with the other leg crossed in front. Pin the standing leg into the base.
  • The shotgun is a long, thin piece joined at the wrist, with its stock resting against the scenery. Pin it at the wrist and glue the stock where it touches the panel.
  • The hair pieces, the plant leaves and the vines are thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like