Sculptor's render of the painted design (kit ships unpainted): full front view of the white-haired swordsman with a bloodied rune sword lowered at his side, beside a griffin's head on a spiked drum base with a wolf-head emblem

Video Game White-Haired Swordsman Resin Garage Kit – Griffin Head Trophy, Rune Sword & Spiked Drum Base, All Eight Heads Included (Unpainted, 42 Pieces)

Full kit with all eight heads, 42 pieces
$169.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the white-haired swordsman with a bloodied rune sword lowered at his side, beside a griffin's head on a spiked drum base with a wolf-head emblem
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the white-haired swordsman with a bloodied rune sword lowered at his side, beside a griffin's head on a spiked drum base with a wolf-head emblem
  • Sculptor's render (kit ships unpainted): four of the eight heads in the kit: bearded and clean-shaven, with heavy scarring or the brow scar only, and one wearing the round glasses
  • Sculptor's render (kit ships unpainted): closer front view of the fur collar, riveted jerkin, crossed straps, chainmail coat and belts
  • Sculptor's render (kit ships unpainted): back view of the two tooled scabbards and the crossbow strapped across them
  • Sculptor's render (kit ships unpainted): the lower half and base: the drum with steel spikes and chains, the horned helmet and the griffin's head on the bloody rock
  • Sculptor's render (kit ships unpainted): close-up of the griffin's head with its open hooked beak, pale eye and long black feathers
  • Sculptor's render (kit ships unpainted): close-up of the dented horned helmet lying on the rock
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the white-haired swordsman with a bloodied rune sword lowered at his side, beside a griffin's head on a spiked drum base with a wolf-head emblem
  • Sculptor's render (kit ships unpainted): four of the eight heads in the kit: bearded and clean-shaven, with heavy scarring or the brow scar only, and one wearing the round glasses
  • Sculptor's render (kit ships unpainted): closer front view of the fur collar, riveted jerkin, crossed straps, chainmail coat and belts
  • Sculptor's render (kit ships unpainted): back view of the two tooled scabbards and the crossbow strapped across them
  • Sculptor's render (kit ships unpainted): the lower half and base: the drum with steel spikes and chains, the horned helmet and the griffin's head on the bloody rock
  • Sculptor's render (kit ships unpainted): close-up of the griffin's head with its open hooked beak, pale eye and long black feathers
  • Sculptor's render (kit ships unpainted): close-up of the dented horned helmet lying on the rock
Video Game White-Haired Swordsman Resin Garage Kit – Griffin Head Trophy, Rune Sword & Spiked Drum Base, All Eight Heads Included (Unpainted, 42 Pieces)

Video Game White-Haired Swordsman Resin Garage Kit – Griffin Head Trophy, Rune Sword & Spiked Drum Base, All Eight Heads Included (Unpainted, 42 Pieces)

$169.00
KitFull kit with all eight heads, 42 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 42 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the white-haired monster slayer from a celebrated fantasy role-playing game, in the moment after a hunt. He stands square on a drum-shaped plinth, his right hand lowering a dark sword with a line of glowing runes and blood toward the tip, and his left hand holding a steel hook that reaches down to the severed head of a griffin on the rubble beside him. His silver-white hair is slicked back into a short tied tail, and his lined face has amber eyes and a scar through one brow. He wears a fur collar over a riveted leather jerkin with crossed straps and a pouch, blackened steel pauldrons, quilted sleeves, steel-and-leather bracers, a knee-length chainmail coat bound in leather, two wide belts, quilted leg panels and steel greaves over brown boots, with a wolf-head medallion at his throat. On his back are two tooled leather scabbards, one holding a sword, and a small crossbow strapped across them. The griffin's head has an open hooked black beak, a pale dead eye and a mane of long black feathers. The base is a drum of dark wooden staves bound with riveted steel bands and a ring of steel spikes, with a wolf-head emblem with red eyes and two hanging chains on the front, topped with gray rock, a pool of blood, splintered beams, tufts of grass and a dented horned helmet. All eight heads are in the box, so you can swap them as you like, along with a pair of small round glasses.

What's in the kit

  • 42 resin pieces in total. All eight heads are in the box.
  • Figure, 15 pieces: ponytail, round glasses, torso, chainmail coat, legs, two boots, two arms, two bracers, two hands and two pouches.
  • Heads, 8 pieces: long hair or short hair, with a beard or clean-shaven, and with only the thin scar through the brow or with heavier scarring across the temple and cheek. Every head takes the same tied ponytail piece.
  • Weapons, 5 pieces: the drawn rune sword, the sword hilt on his back, two scabbards and the crossbow.
  • Base, 14 pieces: the drum in four sections, the rock and rubble top in five sections, the wolf-head emblem, two chain swags, the horned helmet and the griffin's head.
  • Studio size: 1:6 scale, 426 mm (16.77 in) tall, 296 mm (11.65 in) wide and 274 mm (10.79 in) deep (from Tanuki Figures' printing and scale guide).
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Both boots carry the legs, coat, torso and everything above them. Pin the boots to the legs and into the base.
  • The drawn sword is a long, thin blade held out from one hand at an angle. Pin it at the hand. The hook in the other hand has to meet the griffin's head, so fix the figure on the base before you set it.
  • The drum comes in four sections and the rock top in five, with seams across the riveted bands and wood staves. Dry-fit and fill those seams before the emblem, chains and helmet go on.
  • The glasses, chains, sword hilt, crossbow string and pouches are small and thin. The glasses and the scabbards can be left off for a cleaner look.
  • All eight heads come in the kit and every one takes the same ponytail piece. Leave the neck joint unglued if you want to swap heads later.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like