Sculptor's render of the painted design (kit ships unpainted): front view of the yellow electric mouse, the fire lizard in a hard hat and the turtle in sunglasses in a mine cart, with the seed creature flying above on its vines, over a crystal cave base

Video Game Electric Mouse & Friends Resin Garage Kit – Runaway Mine Cart, Vine-Swinging Seed Creature & Crystal Cave Diorama (Unpainted, 1:10 Scale, 16 Pieces)

1:10 scale, 16 pieces
$115.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the yellow electric mouse, the fire lizard in a hard hat and the turtle in sunglasses in a mine cart, with the seed creature flying above on its vines, over a crystal cave base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the yellow electric mouse, the fire lizard in a hard hat and the turtle in sunglasses in a mine cart, with the seed creature flying above on its vines, over a crystal cave base
  • Sculptor's render (kit ships unpainted): the painted scene against a dark cave wall, the cart cresting the curved track with sparks at the wheels
  • Sculptor's render (kit ships unpainted): three-quarter view along the track, with the moles in the ground and the cyan crystals at the front
  • Sculptor's render (kit ships unpainted): side view of the cart on the rails, the fossil shell and the pink and blue crystal clusters
  • Sculptor's render (kit ships unpainted): rear view of the tall stalagmites, the end of the track and the turtle's shell
  • Sculptor's render (kit ships unpainted): gray front view of the full 1:10 scale diorama
  • Sculptor's render (kit ships unpainted): gray three-quarter view with the fire lizard's pickaxe and the seed creature's vines
  • Sculptor's render (kit ships unpainted): gray view from the other side, with the rails curving down past the two moles
  • Sculptor's render (kit ships unpainted): gray rear view of the stalagmites and the crystal clusters
  • Sculptor's render (kit ships unpainted): wide view of the painted scene in a dark cave
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 scale diorama with the studio's height, width and length, and its 16 split parts laid out (the miniature shown on the sheet is sold as a separate listing)
  • Sculptor's render of the painted design (kit ships unpainted): front view of the yellow electric mouse, the fire lizard in a hard hat and the turtle in sunglasses in a mine cart, with the seed creature flying above on its vines, over a crystal cave base
  • Sculptor's render (kit ships unpainted): the painted scene against a dark cave wall, the cart cresting the curved track with sparks at the wheels
  • Sculptor's render (kit ships unpainted): three-quarter view along the track, with the moles in the ground and the cyan crystals at the front
  • Sculptor's render (kit ships unpainted): side view of the cart on the rails, the fossil shell and the pink and blue crystal clusters
  • Sculptor's render (kit ships unpainted): rear view of the tall stalagmites, the end of the track and the turtle's shell
  • Sculptor's render (kit ships unpainted): gray front view of the full 1:10 scale diorama
  • Sculptor's render (kit ships unpainted): gray three-quarter view with the fire lizard's pickaxe and the seed creature's vines
  • Sculptor's render (kit ships unpainted): gray view from the other side, with the rails curving down past the two moles
  • Sculptor's render (kit ships unpainted): gray rear view of the stalagmites and the crystal clusters
  • Sculptor's render (kit ships unpainted): wide view of the painted scene in a dark cave
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 scale diorama with the studio's height, width and length, and its 16 split parts laid out (the miniature shown on the sheet is sold as a separate listing)
Video Game Electric Mouse & Friends Resin Garage Kit – Runaway Mine Cart, Vine-Swinging Seed Creature & Crystal Cave Diorama (Unpainted, 1:10 Scale, 16 Pieces)

Video Game Electric Mouse & Friends Resin Garage Kit – Runaway Mine Cart, Vine-Swinging Seed Creature & Crystal Cave Diorama (Unpainted, 1:10 Scale, 16 Pieces)

$115.00
Kit1:10 scale, 16 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 16 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art diorama of the famous yellow electric mouse and three classic starter creatures from a world-famous monster-collecting game series, riding a runaway mine cart through a cave. The mouse sits in the cart with both paws on the front lip and its mouth wide open, its zigzag tail sticking up behind. The orange fire lizard hangs off one side in a yellow hard hat, grinning, with a pickaxe swung over its shoulder and its tail flame rising above the cart. The blue turtle sits on the back of the cart with its arms crossed behind black sunglasses, looking unbothered. Above them the teal seed creature with a green bulb on its back flies through the air, mouth open, held up by two vines that reach down to the track. Two little brown moles poke up out of the ground on the slope below, and sparks fly off the cart's wheels. The base is a brown rock hill with a curving wooden track, tall ridged stalagmites, a fossil shell and clusters of pink, blue and cyan crystals, with small faceted gems set into the rock. This listing is the full 1:10 scale diorama; the miniature is sold as a separate listing.

What's in the kit

  • 16 resin pieces in total.
  • Figures, 7 pieces: the electric mouse, the fire lizard's body and its arm with the pickaxe, the turtle, the seed creature and the two moles.
  • Vines, 2 pieces: the two vines that hold the seed creature up.
  • Scene, 7 pieces: the mine cart, and the rock base with the track in six sections.
  • 1:10 scale: 222 mm (8.74 in) tall, 109 × 178 mm (4.29 × 7.01 in) footprint (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The seed creature hangs in the air on its two thin vines. Build the base first, pin both vines into the base, then fit the creature onto the vines, dry-fitting before anything cures.
  • On the 1:10 scale the rock base comes in six sections and the rails cross the cuts. Line the rails up carefully; expect to fill and smooth at least one rail joint.
  • The cart rests on the rails at the crest of the track and carries three figures. The fire lizard holds on by one arm, so glue and pin it to the cart's side.
  • Thin parts: both vines, the pickaxe handle, the tail flame, the wheel sparks and the mouse's ears.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like